Electronics Forum | Thu May 26 13:04:44 EDT 2005 | c111
Can anyone recomend tools for cleaning & adjusting of a lead free solder pot? I know it's not recomended to use the standard stainless tools. I was told by an FSE to use wood (kitchen) tools. Thanks
Electronics Forum | Sat Jun 17 08:57:13 EDT 2000 | Ashok Dhawan
Smtnetters One more question on ESD Control program. Does anyone ground there power equipments and how ? e.g., Pneumatic torque tools , electric screwdrivers, hand soldering stations, solder pots etc. I am not sure about pneumatic hand tools , howev
Electronics Forum | Fri May 27 13:50:39 EDT 2005 | pjc
Yeah, made from Durostone or Delmat would be perfect. Try buying some pieces and have them machined into tools or DIY. This is the same material that solder pallets are made from. http://www.boedeker.com/durost_p.htm http://www.polymerplastics.com/
Electronics Forum | Fri May 27 14:21:27 EDT 2005 | Frank
Back in the day, we had a small solder pot used for dipping ICs that were freshly removed from defective boards. What tool did we use to clean the dross? A small piece of card board. After the card board got too toasted, we'd grab a new piece of c
Electronics Forum | Tue May 18 09:49:40 EDT 2004 | Rob
Seems we both have something in common. My company used to issue each person a toolbox with solder pumps, cutters, pliers and the good stuff. But we can never keep them in the boxes. They tend to walk away after a few uses. There's nothing you can do
Electronics Forum | Thu Aug 27 12:49:20 EDT 1998 | Frank S.
Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together?
Electronics Forum | Thu Aug 27 13:55:09 EDT 1998 | Dave F
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Frank: Check the archives for Tesa and Siemens. Dave F
Electronics Forum | Thu Aug 27 13:56:27 EDT 1998 | Stefan Witte
| Where can I find a good tool to splice 8mm and 12mm paper and plastic part carrier tapes together? Siemens has a pretty good splice tool, which crimps a small brass strip into the tape. The cover tape has to be sticked together with a small strip o
Electronics Forum | Mon Nov 21 06:49:57 EST 2005 | pjc
Go to this link for a nice tool for wave solder process troubleshooting: http://www.speedlinetech.com/news_publications/application-notes.aspx?OnId=5 Look for "Wave Solder Troubleshooting Wizard" If you have an Electrovert machine, contact applica
Electronics Forum | Tue Dec 17 13:42:04 EST 2002 | robf
There are a few emerging technologies that have been growing in popularity for the past few years. Pin through paste, press fit connectors and selective soldering machines seem to be displacing custom fixtures. Most of the mixed technology boards o