New Equipment | Assembly Services
• Place of Origin: Guangdong, China (Mainland) • Brand Name: ShanXu • Model Number: PCB RoHS Compliant • Number of Layers: 1-30 layer • Base Material: FR4, High Tg FR4, Halogen Free, SYL, Rogers, Aluminium • Copper Thickness: 1/3oz ~ 6oz • Boar
New Equipment | Assembly Services
• Place of Origin: Guangdong, China (Mainland) • Brand Name: ShanXu • Model Number: PCB RoHS Compliant • Number of Layers: 1-30 layer • Base Material: FR4, High Tg FR4, Halogen Free, SYL, Rogers, Aluminium • Copper Thickness: 1/3oz ~ 6oz • Boar
Electronics Forum | Tue May 25 11:37:50 EDT 2010 | davef
Where on the assembly is the dewetting occurring? Factors that influence dewetting usually involve non-ionic contamination such as: * Residues from board manufacture including silicone surfactants from solder resist & HASL rinse contamination * Comp
Electronics Forum | Thu Dec 06 19:46:08 EST 2001 | davef
First, we�re assuming that we�re talking hot air solder leveled [HASL] bare boards, eh? Consider using A-600 - Acceptability of Printed Boards as the basis for discussing the bare board problems. It is the bare board analog of A-610 - Acceptability
Industry News | 2018-10-18 10:16:53.0
Solder Tinned Pads vs Gold Plated Pads - The Importance of Selecting the Proper Surface Finish
Technical Library | 2021-10-20 18:21:06.0
The solderability of the SAC305 alloy in contact with printed circuit boards (PCB) having different surface finishes was examined using the wetting balance method. The study was performed at a temperature of 260 _C on three types of PCBs covered with (1) hot air solder leveling (HASL LF), (2) electroless nickel immersion gold (ENIG), and (3) organic surface protectant (OSP), organic finish, all on Cu substrates and two types of fluxes (EF2202 and RF800). The results showed that the PCB substrate surface finish has a strong effect on the value of both the wetting time t0 and the contact angle h. The shortest wetting time was noted for the OSP finish (t0 = 0.6 s with EF2202 flux and t0 = 0.98 s with RF800 flux), while the ENIG finish showed the longest wetting time (t0 = 1.36 s with EF2202 flux and t0 = 1.55 s with RF800 flux). The h values calculated from the wetting balance tests were as follows: the lowest h of 45_ was formed on HASL LF (EF2202 flux), the highest h of 63_ was noted on the OSP finish, while on the ENIG finish, it was 58_ (EF2202 flux). After the solderability tests, the interface characterization of cross-sectional samples was performed by means of scanning electron microscopy coupled with energy dispersive spectroscopy.
A Review of Test Methods and Classifications for Halogen-Free Soldering Materials A Review of Test Methods and Classifications for Halogen-Free Soldering Materials Over the last few years, there has been an increase in the evaluation and use
SMTnet Express, December 30, 2021, Subscribers: 26,039, Companies: 11,482, Users: 26,994 " ---> Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy The solderability of the SAC305 alloy
Surface Mount Technology Association (SMTA) | https://www.smta.org/icsr/speaker_forms/Paper-Format-Requirements.doc
. Immersion silver surface finish eliminated due to corrosion risk Alternative finish must meet ICT and solderability requirements Investigate several alternatives (OSP, ImSn, ENIG, and LF HASL) PCB laminate may change from what was used on DT and NB products
winsouce.jpg)
.gif)