Electronics Forum | Tue Nov 01 14:38:45 EDT 2022 | glasscake
Did the tray changer use to work on this machine? was it ever disabled and uncoupled from the machine? If you have an old data disk or backup disk of the machine try restoring to that. There is also a jumper inside the wiring harness to include the
Electronics Forum | Mon May 07 22:25:21 EDT 2001 | Doug Kester
Has anyone heard of a single or double tray holder plate for Siemens Siplace equipment (either OEM or aftermarket). This would be similar to the Universal, Quad, and Zevatech platens for trays that just clip on to the feeder holders. Have only a co
Electronics Forum | Fri Jun 20 13:09:42 EDT 2008 | jim5926
Yes we are operating two SM 421 with side tray changer and they are great machines. We have had no trouble with them and the service from Dynatech has been great.
Electronics Forum | Thu Aug 21 15:30:28 EDT 2008 | jamyboy
Juki is a great way to go as far as reliability the Jukis are bullet proof. Change overs are much like other Japanese machines if you have the feeder carts, tray changer and stay away from Vibratory feeders you will be successful with this platform i
Electronics Forum | Mon Feb 27 10:12:51 EST 2012 | acsscott
OK, Used specialist to enter the machine config at power up. We don't have a Tray Changer option listed.
Electronics Forum | Sat Sep 05 16:09:10 EDT 2015 | emanuel
Need assistance - I want to disconnect an unused LCS module from an Emerald machine. I disabled the tray changer and buffer conveyor in the machine's configuration but I still get an L212 error on the bottom of the screen and the machine hangs during
Electronics Forum | Tue May 06 11:14:40 EDT 2003 | k_h
Sorry, I did misunderstand. My opinion would be: Assuming nothing else used feeder space, like tray changers, camera's, nozzles, ..... and assuming 1 slot = 1 8mm feeder position, I think 70-90 slots would be reasonable. A reasonably priced feeder ta
Electronics Forum | Thu Jan 05 14:00:40 EST 2006 | Steve
We are currently runing a JUKI 750 and 760 as well as a 2060. I can't say enough good things about the quality of the machines and service from JUKI. I've had zero downtime in the last 2 years due to mechanical breakdown and our machines run 18 hours
Electronics Forum | Thu Jun 01 07:40:23 EDT 2006 | netellink
I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine
Electronics Forum | Tue Feb 21 10:15:07 EST 2012 | vinitverma
Forgot to mention. To disable the LCS you need to disable it in the machine config - by changing Tray Changer to NONE. Of course for this you will need the password which is "specialist". After setting this in the software, you also need to remove t