Electronics Forum | Tue Jul 23 07:47:10 EDT 2002 | John S
We have a RAD5 and RAD 8, both of which have the Expanded Range Verifier. Has anyone had success verifying the correct value of electrolytic caps? Our machine stops several times a day for a false failure, and Universal isn't much help. Thanks John
Electronics Forum | Tue Mar 13 07:56:19 EDT 2007 | Cmiller
Since you got no reply, I will give it my best shot but we do not have a radial inserter because they are really expensive. I would start with Universal instruments. I think its http://www.uic.com. I think they still make them in New York. TDK and Pa
Electronics Forum | Thu Jul 19 11:15:29 EDT 2007 | gmoritz
We just obtained a Radial 5 Inserter with no documentation on how to run the software or to operate the machine. All I have is some hastily handwritten notes from the limited instructions that the installer gave me. Does anyone know anyone who has
Electronics Forum | Wed Sep 11 20:36:04 EDT 2013 | action_101
UIC still manufacturers new thru-hole machines. Both axial and radial insertion models are available. They stopped making the multi-mod dip inserters in '91 or '92. And parts are easily acquired for any older models, there were a ton of machines out
Electronics Forum | Mon Jul 30 15:28:25 EDT 2007 | gmoritz
I'm posting a diary of the major repair experience that we had this weekend. I'll follow up with a shorter post that sort of summarizes a few things. ------------------------------------------------ The service guys showed up at our facility about
Electronics Forum | Thu Aug 02 22:33:24 EDT 2007 | simsj
We've had some experience with Universal's machines as well. Aside from the mechanical problems you're experiencing, that level of control hardware is susceptible to power spikes/fluctuations. Save yourself some trouble later on and get a good UPS.
Electronics Forum | Mon Aug 27 16:51:14 EDT 2007 | gmoritz
I'm updating this thread and replying to the first post in the thread due to the annoying tendency for later posts to get indented to the point that you can only put one or two words per line. Our Rad 5, hit the skids again for the last couple of w
Electronics Forum | Mon Jul 30 16:21:33 EDT 2007 | gmoritz
I'll respond to this one since it is the most poignant post in this thread: ------------------------------------------------------ Most of what follows is common sense, but sometimes we need to get grounded to remember these common sense things. ---
| 1 |
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
winsouce.jpg)
.gif)
