Electronics Forum | Wed Jul 10 08:50:02 EDT 2013 | mobe1969
Hi SMTnet Members I'm looking for some help with my Westek ICOM500 Ionic tester. It has been sitting for a while. We want to get it up and running. I don't have any tools with this tester. Do you know what material I need to get this to work? Calibra
Electronics Forum | Sat May 07 04:28:51 EDT 2005 | grayman
try checking the speed/conveyor driver,encoder,comunication I/O Board system and lastly the program. If the driver is at fault replaced it do not repair it. If software try to load it again but make back up.
Electronics Forum | Mon May 09 08:20:52 EDT 2005 | stepheniii
I am not familiar with these ovens, but most I have seen have an optical emmitter reciever and a some kind of sprocket with holes to measure speed. If there is dust build up on the emmitter or reciever, this can cause the speed to increase because th
Electronics Forum | Wed Apr 15 13:47:17 EDT 1998 | kend
I have 2 and am generally pleased with them. 1 machine has performed perfectly without fail, while the other has had a number of problems. The problematic machine was once a demo and probably took alot of abuse before we got it. Easily a 16 mil pit
Electronics Forum | Fri Jan 17 03:23:14 EST 2014 | aemery
A UP500 Wow! I did work on one last year. Most left out there are labeled QUAD AVX500's, then Speedline bought Sigmaprint and it became a UP500. But you get the MPM sigpro software with the Speedline machine; they didn't build to many. It was used
Electronics Forum | Thu Mar 11 03:13:06 EST 2021 | ttheis
sent you a message with my email address- otherwise send me yours and I'll send a link to a hard drive image from my up500 machine
Electronics Forum | Fri Mar 12 15:46:54 EST 2021 | ttheis
Hi Gerlad, I sent you a link from a file transfer service with an image of our up500 take with macrium reflect software. Let me know how it works out.
Electronics Forum | Thu Mar 11 16:59:00 EST 2021 | toledog
Hi Tom, Thank you for offering the UP500 drive image. As stated above, direct email is not working for me. I created a temporary google document with my contact information. https://drive.google.com/file/d/162fF57RAkt1TwFUY5sDhpH9RrcSU0ND6/view?usp
Electronics Forum | Wed Mar 23 12:10:04 EST 2005 | dphilbrick
Has anyone out there done any lead free testing using a Vitronics Unitherm 500 oven? based on the specs I have dug up on the machine I suspect it should work fine but it would be great to hear from someone that has done it. Thanks in advance.
Electronics Forum | Wed Nov 27 09:43:17 EST 2013 | mchawg
We recently rebuilt the generator and power supply on our '97 vintage Optiflux Ultrasonic fluxer. That cleared up all its issues except. Ultrasonics are reported by all indicators to be running in both Setup and Run mode, however, the nice rooster-t