Electronics Forum | Thu Oct 30 14:07:29 EDT 2008 | jdumont
We use a normal off the shelf (Best Buy) mini fridge. As far as the temp readings, I got some USB dataloggers from Omega and stick them in there. Download the data to your PC every couple of weeks (Outlook reminder). I also use these for our Nitrogen
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Fri Aug 26 09:39:21 EDT 2022 | compit
The emulator doesn't work that way. You can create only 1.44 MB partitions (e.g. 100 pieces on one flash drive) (with the supplied software) and they will be visible as floppy disks. It is not a USB port.
Electronics Forum | Mon Jan 06 20:53:23 EST 2020 | mikeyg12
Hello everyone! I have had this idea in my head to DIY a desktop KVM (without the V so I guess just a KM) board that I can solder USB A headers to with a DPDT switch. I designed the board and when I thought it was all good to go I proudly sent it of
Electronics Forum | Tue Jan 07 02:04:45 EST 2020 | robl
Hi Mikey, Your signal pins (2 & 3) for USB1, 2, & 3 are all connected together so there is no way of splitting the incoming signals from the 3 ports. Normally there would be an IC (a USB hub controller) switching between the signals so that the PC
Electronics Forum | Wed Aug 24 12:15:57 EDT 2022 | kumarb
We have the Emerald-X (Yamaha YV88X) and used this article and software for our machine. Working very well. https://www.philscomputerlab.com/gotek-floppy-emulator.html# Perhaps consider the software from the above link.
Electronics Forum | Sat Nov 03 11:20:35 EDT 2012 | davef
EricR: There's substantial information about the properties of solder alloys on the web. Here's an example of something that I clipped from one site Alloy ||Solidus (°C)||Liquidus (C°) ||Tensile Strength (psi / MPa) Sn42 Bi58||-E-||138||8000 / 55.2
Electronics Forum | Sun Jan 13 19:44:02 EST 2008 | grantp
Hi, We need to solder a USB plug onto a PCB in our SMT machines, and this is the same type of plug you see on USB storage devices. It's a very flat connector with 4 SMT pins, however the hard part is the bottom of the connectors is the same level
Electronics Forum | Tue Aug 23 09:52:51 EDT 2022 | jojoled
Can anybody recomend exact model number of USB to floppy disk emulator, which works for sure on JUKI KE7xx series PnP machines? I have bought this one : https://www.gotekemulator.com/P_view.asp?pid=54 and have KE760 machine, but it doesnt work (tried
Electronics Forum | Sat Jun 12 19:48:47 EDT 2010 | bootstrap
I like what you're doing. 20 years ago anyone, hobbyists and tiny garage-shop companies could create electronics devices just as sophisticated and cool as big corporations. Today, SMT has largely trashed the creativity (and competition) that existe
