Electronics Forum | Sat Dec 13 08:03:46 EST 2003 | Stefan Witte
The only part, which could cause component misplacement on the rotary heads of the Siplace machine is the vacuum valve. I don�t know the official name in the part catalog, but I use to name it plunger. The plunger is moved in and out by a miniature s
Electronics Forum | Thu Nov 29 15:52:53 EST 2007 | jmelson
Some other machines are a lot simpler. Here's how the Philips (mady by Yamaha) CSM84 works. Smaller tape (8 and 12 mm) feeders are all mechanical. A plunger on the head pushes a lever on the feeder at the same time the head comes down. First, the
Electronics Forum | Wed Jun 15 16:54:33 EDT 2005 | linny999
Siemens is an excellent platform. To reduce your scrap:- Carry out the specified maintenance, especially the segments and valve plungers; Calibrate revolver heads to benchmark. Remove the tables, smooth the magnetic strips, clean the mounting faces,
Electronics Forum | Wed May 19 20:45:34 EDT 2021 | compit
The black pad (washer) should be complete with the valve. I have replaced the floppy drives a long time ago :). Software - do you have the optimization of the program in the machine !!! The only thing I use additionally is "PCB Synergy" to import f
Electronics Forum | Tue Jan 31 02:59:18 EST 2006 | jgarver1
You also should check to make sure you have blow off at the placing station set properly. I have seen machines with the flow control valve shut completely off not release parts properly. The parts end up in the scrap bin and the machine thinks they
Electronics Forum | Tue Dec 22 13:56:20 EST 1998 | Michael Allen
Yes, you can adjust the board clamp speed by adjusting the flow control valve on both air cylinders (front and rear). You may also want to adjust the software delay for the conveyor so that it starts after the board is completely lowered. | Once
Electronics Forum | Wed Oct 19 13:07:04 EDT 2016 | cyber_wolf
Are there indentations in the paste ? If there is, you have a couple things to look at off the top of my head:1) make sure your spool valves are shutting completely off. 2) make sure there is nothing sticky on your nozzles.3) Adjust the blow off/ "ki
Electronics Forum | Fri Mar 28 15:08:37 EDT 2008 | jmelson
Hello, all, I have been having problems with bent push rods on my Philips CSM84. I have caught it a couple times when it happened, but it happens so fast I still don't know exactly what the sequence is that causes this. The push rod is clipping a
Electronics Forum | Thu Sep 20 13:28:23 EDT 2001 | ohanlon
Here is how the FormFlex system conforms to component variations. The FormFlex system utilizes an oil chamber that is common to ALL the pins once the system is set. Pushing down one pin will cause the displaced oil to be shared by all the others pins
Electronics Forum | Wed Aug 12 13:26:31 EDT 2015 | tombstonesmt
Esoderberg, Thank you for the response! I was completely unaware that HumiSeal provided latex masking. I have a sample on the way. I sampled some Wondermask 2211 in the past. By the TDS description, I wonder if they share the same makeup; both