Industry Directory | Manufacturer
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Industry Directory | Manufacturer
DoraniX specializes in direct to product printing, specifically on cut sheets, pouches, cards, bags, etc. DoraniX has most recently developed the ThermaPrint 64 to fill the void in singles thermal transfer printing.
New Equipment | Curing Equipment
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a rigid vessel and heats & cools with
Convection Reflow Oven The World's Best Convection Reflow Oven for High-Throughput The New reflow oven platform revolutionizes the Convection Reflow Oven / Reflow Soldering industry with several new and ground breaking designs! The MK7 convecti
Electronics Forum | Sat Oct 19 11:48:39 EDT 2002 | davef
Good points, John. Continuing to track on the voiding issue, why remove voids anyhow? * Voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on at least on a temporary bas
Electronics Forum | Tue Mar 09 17:52:05 EST 2004 | davef
Bryan: Comments are: * You're correct, solder paste formualtion is a major driver to voiding in BGA balls. * Voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on a temp
Used SMT Equipment | X-Ray Inspection
CR Technology Model Number: CRX2000 Serial Number: 1S1878.0100 Year 2000-2001 Hamamatsu Tube Type -130kV X-Y-Z indexing table with joystick control 18" x 24" X-Y travel Full 360 degrees rotation and tilt up to 90 degrees BGA / Flip Chip Sold
Used SMT Equipment | X-Ray Inspection
Yestech High Resolution Imaging PCB Xray Serial Number: X10706656 Model Number: YTX 3000 Year 2007-2008 130 KV XrayTube with 5 micron spot size Xray on Hours - 18.2 Standby Hours - 328.5 Measured Filament - 2.22 Hamamatsu L19181-02 Sample Ma
Industry News | 2024-02-26 16:22:08.0
HELLER, a leading provider of reflow soldering equipment, concluded its 2024 Sales Kickoff Meeting in Suwon, South Korea on a high note. The meeting brought together sales representatives from all branches and subsidiaries to discuss the company's unified goals and objectives for the year ahead, and to equip them with the tools and knowledge necessary to achieve success.
Industry News | 2003-05-30 08:09:11.0
A new compact package integrates a Hall-effect sensor IC with a back-biasing magnet to achieve high airgap performance and meet restrictive space requirement.
Technical Library | 2023-01-17 17:25:14.0
BTC Void Reduction For Yield and Performance Enhancement
Technical Library | 2023-01-17 17:19:44.0
A test program was developed to evaluate the effectiveness of vacuum reflow processing on solder joint voiding and subsequent thermal cycling performance. Area array package test vehicles were assembled using conventional reflow processing and a solder paste that generated substantial void content in the solder joints. Half of the population of test vehicles then were re-processed (reflowed) using vacuum reflow. Transmission x-ray inspection showed a significant reduction in solder voiding after vacuum processing. The solder attachment reliability of the conventional and vacuum reflowed test vehicles was characterized and compared using two different accelerated thermal cycling profiles. The thermal cycling results are discussed in terms of the general impact of voiding on solder thermal fatigue reliability, results from the open literature, and the evolving industry standards for solder voiding. Recommendations are made for further work based on other void reduction methods and additional reliability studies.
General curing, die attach curing, underfill curing, film & tape bonding, wafer laminating.
· What is the difference between SMT vacuum reflow soldering machine and ordinary reflow soldering machine? · What problems can be solved by smt vacuum reflow soldering machine? · What is the basic principle of vacuum reflow machine? · Ho
Training Courses | | | IPC-6012 Specialist (CIS)
The Certified IPC-6012 Specialist (CIS) training covers design, fabrication and inspection of rigid printed boards.
Training Courses | | | IPC-600 Specialist (CIS)
The Certified IPC-600 Specialist (CIS) training targets quality assurance and acceptance of bare printed circuit boards.
Events Calendar | Wed Mar 08 00:00:00 EST 2017 - Wed Mar 08 00:00:00 EST 2017 | San Diego, California USA
San Diego Chapter - Minimizing Voiding in Bottom-Terminating Components
Events Calendar | Thu Jan 10 00:00:00 EST 2019 - Thu Jan 10 00:00:00 EST 2019 | Manassas, Virginia USA
SMTA Capital Chapter: Operation of a Vacuum Reflow Oven with Preliminary Void Reduction Data
Career Center | Oldsmar, Florida USA | Maintenance,Production
Job Description: • Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up. • Able to identify and touch up poor wetted solder joints, solder voids / i
Career Center | Oldsmar, Florida USA | Engineering,Maintenance,Production
Job Title: Assembler 2 – IPC 610 – 1st Shift Address: 3655 Tampa Rd, Oldsmar FL 34677 Duration: 1 year Pay Rate: $15-$18 Hours: 9/80 schedule Monday – Thursday 6:00AM – 3:30PM, Friday 6:00AM to 2:30PM Job Description: Use microscope to verify
SMTnet Express, October 10, 2019, Subscribers: 32,263, Companies: 10,893, Users: 25,93 Fill the Void IV: Elimination of Inter-Via Voiding Credits: FCT ASSEMBLY, INC. Voids are a plague to our electronics and must be eliminated! Over the last few
SMTnet Express, October 3, 2018, Subscribers: 31,373, Companies: 11,056, Users: 25,258 Fill the Void II: An Investigation into Methods of Reducing Voiding Tony Lentz - FCT Assembly , Patty Chonis, JB Byers - A-Tek Systems Voids in solder joints
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_package-symbols-versus-mechanical-symbols_topic2518.xml
testing.In Allegro a mechanical plated through hole will not allow a connection and would be voided within a shape. Package Symbols versus Mechanical Symbols : I'
Heller 公司 | http://hellerindustries.com.cn/Vacuum-Void-Reduction-Reflow.pdf
voided test vehicles was subjected to secondary assembly using vacuum reflow processing to reduce the voiding. The x-ray images in Figure 7b (192CABGA) and Figure 8b (84CTBGA) show the resultant solder joint quality after vacuum reflow. In the expanded x
.gif)
