New Equipment | Board Handling - Storage
Effective moisture damage solution that improves yields. http://eurekadrytech.com/fast-super-dryer/tus-101 Capacity: 93 Liters Humidity Range: 10%-50% Recovery Time: Recovers to ≤ 20% RH within 2 hours after accessing door for 30 seconds or les
New Equipment | Board Handling - Storage
Eureka TUS-2001 Fast Super Dryer Dry Cabinet Specs: http://eurekadrytech.com/fast-super-dryer/tus-2001 Capacity: 1314 Liters Humidity Range: 10%-50% Recovery Time: Recovers to ≤ 20% RH within 2 hours after accessing door for 30 seconds or less. Ext
Electronics Forum | Thu Apr 14 09:45:58 EDT 2016 | emeto
Why don't you fix the PCB flatness instead? If that is not the problem, I will check the part warping during the reflow process.If the part is large as you mentioned, it probably warps a lot during reflow. Try to bake the parts in front,based on MSL
Electronics Forum | Tue Apr 29 02:08:21 EDT 2008 | sin4d
Hi, I am also facing the same probelm. I assembly a substrate with a thickness of 0.30mm and the board warp after reflow. If I bake the substrate at 125 Deg C for 2 hours will it help to solve this problem? Thanks