Electronics Forum | Wed Jun 26 21:05:15 EDT 2002 | ianchan
Hi Dave F, customer calls it "warp", we can call it "twist/bow"..etc. the "warp" occurs on individual PCB cells of 28per each panel. the overall dimension of the panel is 139mm x 168mm, and each individual PCB cell is 2.4mm x 1.2mm. Thickness is 0.
Electronics Forum | Tue Jun 01 12:48:49 EDT 2004 | pjc
AP25 can handle warped boards to a degree. I also depends on the board clamping system on the machine. There are three avbl. First is Universal Vacuum box, second is dedicated tooling with vacuum and third is Y Snugger tooling that does not use vacuu
Electronics Forum | Wed Jul 30 22:37:15 EDT 2003 | Dean
I have been using a srt-1000 since 98. My guess is your heating up the part too fast. What is your heating rate (deg. C per second)? PBGA's do warp. Your profile should mimic your smt process (assuming you have no warping there). Also, check wit
Electronics Forum | Wed Jan 20 14:21:54 EST 1999 | Dave F
| I need some opinions (And I know everybody has one). | I am mounting a board into a case, after mounting the board | I am loading it with stress in the middle causing it to bend around .030 inch. The board is 4" X 6" and is Bending in the 4" dire
Electronics Forum | Mon Jun 14 09:16:58 EDT 1999 | Adam Pratt
| | | | | Hello all! | | | | | Recently we got a problem about the Funtional test. Some boards passed tests by using the auto-fixture(vacuum), but failed by using manual test fixture(need to plug CPU, DIMM etc.). The error symptom is no picture. We d
Electronics Forum | Wed Dec 23 11:11:07 EST 1998 | john watt
| | I have been developing a BGA Process and are having problems with a 310 IO PBGA reflowing. I am achieving good wetting exept 2 to 5 balls on the outer perimeter I have a good profile my air flow is set per mfg spec, the strange thing is that it d
Electronics Forum | Fri Dec 18 10:18:55 EST 1998 | Dave F
| I have been developing a BGA Process and are having problems with a 310 IO PBGA reflowing. I am achieving good wetting exept 2 to 5 balls on the outer perimeter I have a good profile my air flow is set per mfg spec, the strange thing is that it doe
Electronics Forum | Sat Nov 18 08:42:11 EST 2006 | davef
Bow & twist: IPC-A-600. Acceptability of Printed Boards 1.5%; Goal 0.005" per inch; Practicle 0.007" per inch
Electronics Forum | Tue Feb 09 12:30:37 EST 2021 | jzeivel
I am quoting a new job and am wondering if I should use carrier pallets for it. There are 2 PCBAs both are 31mil thick. One is about 16 inches long, and the other about 13 inches long. Both are 1.4 inches wide. I was thinking to put them in a 2 u
Electronics Forum | Fri Apr 08 19:55:48 EDT 2005 | Dhanish
The problem is IPC spec. calls for 7 mils/inch but my equipment spec. calls for Warpage as 40 mils.Our Equipment folks saying if a board warps more than 40 mils ,there will be placement issue.
