Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-09-07 14:38:31.0
A repeat customer specializing in high-technology interconnect, sensor, and antenna solutions, partnered with us to dispense small volumes of solder paste (Indium 10.1 SAC305 T6SG 78%m) onto backplane connectors – gold pads 0.175mm x 0.225mm. We performed a test requiring 0.200mm diameter or smaller dots to demonstrate the dispensing capability required.
Industry News | 2003-03-25 08:31:07.0
On completion of the transaction, Flairis will become a wholly-owned subsidiary of Beyonics and its shares will be delisted from Sesdaq.
Industry News | 2020-02-25 12:51:11.0
MIRTEC will exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.
Industry News | 2003-03-05 08:35:10.0
he will be responsible for formulating R&D strategies and spearheading the Company to keep abreast of the latest development in global manufacturing technology as well as strengthen its R&D division.
Industry News | 2003-06-10 08:56:19.0
Seeing the increasing number of electronic products having image capturing functions in the market, the Company has decided to seek to further augment its manufacturing capabilities to produce image sensors to satisfy order demand for these components.
Industry News | 2018-09-17 19:37:42.0
MIRTEC, “The Global Leader in Inspection Technology,” announces plans to exhibit at SMTA International, scheduled to take place Oct. 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, IL. The company will premier its award-winning MV-6 OMNI 3D AOI and MS-11e 3D SPI systems Booth #208.
Industry News | 2021-06-15 04:22:53.0
IPCs Connected Factory Exchange (CFX) standard defines communication between processes and devices for Industry 4.0. MIRTEC and Optel Software worked together to develop a CFX based interface between MIRTEC's AOI machines and Optel Software's MES system. The goal was to implement full AOI process control at test it at their mutual customer site, VIRTEX plant in Dallas, TX. The resulting CFX interface is vendor independent and will allow MIRTEC to interface with other MES systems, and Optel Software to interface with other AOI machines, with no changes.
Industry News | 2015-05-07 19:28:29.0
MIRTEC announce a new strategic cooperation that will empower yield improvement in the electronics manufacturing industry.
Industry News | 2012-01-23 00:02:12.0
MIRTEC, “The Global Leader in Inspection Technology”, will premier its complete line of 3D AOI, SPI, X-ray and LED inspection systems at the IPC APEX Expo in booth #3637.
