Electronics Forum | Mon Jun 23 04:00:43 EDT 2003 | Paul Cooper
Hi there There are a number of things worth considering when viewing bga's. Firstly, like any other solder joint that you have been inspecting for years, suface finish is critical. Secondly, and again like other joints shape is important. Now it may
Electronics Forum | Wed Aug 30 09:56:37 EDT 2000 | NLykus
Hi Ramon, We have had this problem before on our Seho Wave Solder Machine. We are currently using a spray fluxer as well. By imersing the PCB into the flux you stated you are getting good results. What you need to do is check your spray patter
Electronics Forum | Tue Nov 16 11:11:18 EST 2004 | iva
Hello Charlie, For Application of thermal conductive glue by dispensing, Luxeon recommends Amicon E3503 from Emerson and Cuming (www.emersoncuming.com) for its standard Luxeon Power Light Sources. For optimal thermal connection it is important that
Electronics Forum | Wed Aug 10 08:10:39 EDT 2005 | davef
Comments are: * Sounds like it's necessary to clean "heareous F381, F352 no clean solder paste" in your application. Consider a paste that may be better suited to your application. * If you're cleaning "low residue flux", consider using an organic ac
Electronics Forum | Sat Mar 27 03:57:09 EDT 2010 | grahamcooper22
I agree with Steve. Your are too hot and too hot for too long. What is the device spec for Peak Package Temperature (PPT)? (this is usually on the moisture barrier bag) Many leaded BGAs have PPT of 225 Deg C. Even if it is higher, like Steve suggeste
Electronics Forum | Thu Jan 11 00:52:12 EST 2007 | behrsam
Mario, I tried a couple of profiles. In all cases the preheat ramps fairly slow, while the reflow utilizes the radiative heater to speed to reflow as quick as possible. I tried a quick profile and a slower one. The quick has about 15-20 sec at pre
Electronics Forum | Thu Jun 22 10:23:14 EDT 2006 | cuculi54986@yahoo.com
I'm no AOI expert by any means, however I spent a few minutes one time about 4 years ago working on an old CR Technology (or is it CR Technologies?) machine so I've been chosen by my company to be the "technical guy" for our AOI evaluation. We are l
Electronics Forum | Wed Jul 01 11:19:50 EDT 1998 | Earl Moon
| I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built some
Electronics Forum | Tue Jul 27 16:44:31 EDT 1999 | Earl Moon
| | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | 12BGA per assembly | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | Pads .014inch | | | Vias within footprint .020inch | | | Vias to be filled by bottom side(sol
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen