Electronics Forum | Sun Dec 14 13:52:10 EST 2008 | tsvetan
you may check http://www.manncorp.com MC-391 (I saw they have banner here), we have same bought here in Europe under the brand Autotronik, this is made in China machine. Very easy to use and very cheap. with vision centering and good precision, not s
Electronics Forum | Mon Jan 12 01:20:07 EST 2009 | sachu_70
Hi Konrad, I would suggest you include a clear mention of your requirement towards mask color as a "Special Note" in PCB Gerber / PCB drawing, for ready reference by your PCB manufacturing during fabrication. However, slight changes in color shade co
Electronics Forum | Tue Nov 29 19:48:10 EST 2011 | emrtech
I have created an excel macro that will work with my100 and my9. this macro (excel spreadsheet will work with excel 97 through 2007) will generate the PCB .gen file to import into my9 or my100. the components can also be imported before generating th
Electronics Forum | Tue Oct 20 17:30:15 EDT 2009 | rodrigo
Hi all, We use the IMF converter (and a floppy disk) to move programs to and from the MCS30. The only way to get to the command line in the MCS30 is to reboot and do the ctrl+shift+_ ketpresses. I wanted to try to add an entry to the Fuji User inter
Electronics Forum | Sat Nov 07 10:09:52 EST 2009 | ramses2001
Hi Nemo, In my factory we have an offline AOI from VISCOM for two SMT lines. It's not so easy to program, but the results are very good. Anyway you should have to think that an AOI system needs a human inspector and a technician to debug the program
Electronics Forum | Fri Nov 13 11:41:37 EST 2009 | gregcr
Hi All, I am implementing a proper feeder maintenance program for my HSP chipshooter feeders. I have the calibration jig. I am developing a procedure with the following general steps: 1. Cleaning 2. Visual Inspection / Repair 3. Calibration / Testi
Electronics Forum | Mon Mar 08 16:23:05 EST 2010 | mikesewell
I'd think about database structure and programming aspects as well. I'm cleaning up an implementation where the parts were taught as they appeared to the AOI programmer irrespective of the Pick & Place data/libraries. Lots of rotation fixes, parts
Electronics Forum | Tue Jul 20 15:03:08 EDT 2010 | bigdaddysoy9
Dan, If you are starting a library from scratch, it will probably take a while to program on any machine. Building a library is the most time consuming part. We use ViTechnology machines. They have a generic library that you could use to generate
Electronics Forum | Tue Sep 14 17:49:36 EDT 2010 | g2garyg2
The problem with the Sunsda units is that they use a special circuit board, not PLC and Chinese software for programming, so getting into the program to find out what is going on is a problem. Have you replaced the SMEMA cable? I have seen bad ones.
Electronics Forum | Fri Oct 15 16:21:48 EDT 2010 | dyoungquist
Brian When we were looking into getting a selective solder system 2 years ago, I had factory tours at both RPS and ACE. We ended up choosing RPS. Not a big difference between them. The RPS system is a little easier to program in my opinion and wa
