Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis
Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able
Electronics Forum | Mon Jul 25 19:12:17 EDT 2022 | proceng1
I generally do not design an array larger than 10" x 12". Other than just thermal mass, the one issue to watch with extra length is if the array is so large that it spans multiple heat zones at the same time. We have panels that are up to 48" l
Electronics Forum | Tue Jul 26 13:34:18 EDT 2022 | emeto
10x6 to 12x8 is ideal for most equipment. Too small panel is not good too for handling by humans and machines. 1.6mm you can use as and depanel on the router. 0.6mm you might need to run on SMT carrier, if you see warping.
Electronics Forum | Mon Aug 01 20:04:25 EDT 2022 | jdengler
Since you can make it work with unique names for the component on each feeder but not when they are the same it is going to be a system limitation. Possibly a different software version might allow it but you would need to find someone that has done
Electronics Forum | Wed Aug 03 13:06:51 EDT 2022 | proceng1
I am a little lost on some of that, but here is what we do. The camera view has the package outline, including an orientation indicator. The operator has the camera step through the program, and checks that the outline and indicator are correct on
Electronics Forum | Mon Aug 08 20:27:34 EDT 2022 | stephendo
It depends on what you will be building and your customer`s requirements. You many need an X-ray machine. You will almost certainly want magnifier lenses with ring lights. And you will probably never have enough binocular microscopes. You will also
Electronics Forum | Fri Aug 19 08:32:54 EDT 2022 | angela t
The GKG G5 press has occasional drive alarms, sometimes it turns off and restarts, sometimes it needs to be unplugged from the board cable at the back and the alarm returns after a period of production. What is the problem? Could any of you give me a
Electronics Forum | Mon Aug 29 19:41:07 EDT 2022 | assuredtech
I'm not positive on the SFN3 but I have three of the MBF80-SOL which might be more inline to what you are after for 8mm package. It haa 5 lanes. It sounds like the MBF80 is... MBF80-SO/SOL 6-Lane Belt Feeder, 3 SOL, 3 SOIC. 3 SOLIC + 3 SOIC. Edward A
Electronics Forum | Tue Sep 06 01:32:25 EDT 2022 | poly
I've got two Genesis machines (GC30 and GX11) that I bought used. The PWC on one is disabled, and if I enable that axis the machine will tell me it can't find or initialise that axis. I tried swapping the board 48904905 from the working machine to th
Electronics Forum | Tue Oct 18 15:50:01 EDT 2022 | smith88
IPC states chips and cracks in glass body are defective if beyond specifications. Chips or cracks in glass body beyond the part specification, see Figure 9-18. • Cracked or damaged glass bead beyond part specification (not shown). On some glass
