Electronics Forum | Tue Aug 17 11:44:19 EDT 2004 | rlackey
Hi, does anyone have any real experience in using the following AOI systems (including opinions on support)? Cyberoptics Flex Agilent SJ50 MVP Supra Landrex Optima (Teradyne) Please fight the urge to pass comment or point out the error of my ways i
Electronics Forum | Tue Nov 01 13:57:18 EST 2005 | bobpan
2c belt driven.....'a little' less accurate (costs less) 4c ball screw......'a little' more accurate (costs more) vu4-vu6 upward camera for fine pitch.....cant remember but the differenc is the field of view for camera. part centering is quad-align
Electronics Forum | Mon Sep 22 11:26:19 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can > repair the Green firewire camera (Cyberoptics) > off the Dek printers. I had 2 go bad and would > like to get them fixed if possible so I would > have backups. > > Thanks in Advance I can repair
Electronics Forum | Fri Dec 16 01:25:35 EST 2011 | AAAA
Hi, We are using CyberOptics Flex Ultra for 7 years, and believe me it requires a lot of time to create and tune up the programs. In my opinion, this machine is not suitable for high mix low volume production. Also we have Omron AOI, which is algor
Electronics Forum | Fri May 06 10:18:43 EDT 2011 | bobpan
Hello Doug, There is no tuning up of the cyber-unit. From the symptoms you describe......sounds like the white cable that plugs into the cyber is intermittent. Maybe you can find one somewhere and try that. The cyber unit is a closed assy. and was ma
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Tue Apr 27 10:40:36 EDT 2021 | mikekeens
Hi, I'm currently in the process of evaluating a number of 3D AOI machines such as Koh Young Zenith Alpha HS+, CyberOptics SQ3000, Mirtec MV-6 Omni, Parmi Xceed L and Aleader ALD8720S. Does anyone have any thoughts on these machines as to which is b
Electronics Forum | Mon Apr 08 13:38:50 EDT 2024 | poly
Ahh, so cyberoptics is out too now? I've got a used Koh Young SPI and I'm not sure if the newer software is less horrific but it hasn't made me enthusiastic about their AOI options... once I get it working I might grow to like it though. Mirtec then?
Electronics Forum | Fri Oct 05 16:05:58 EDT 2001 | seand
Hello everyone, Your chief variable here is going to be your epoxy. Different materials react accordingly to various inspection methods but, DEPENDING on your print parameters and material, you may be able to utilize an inline inspection machine.
Electronics Forum | Mon Apr 28 08:52:10 EDT 2003 | davem
Chrissie, I'm glad you (and your people) made it through the painful process of reworking all those BGA's. Hope all your boards sucessfully pass test. Now on to the larger issue. In my experience, the solder paste screen printing process is (along
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936