Electronics Forum | Thu Nov 03 11:23:40 EST 2005 | JeffP
Jay, What are your board sizes? What is the maximum size that you envision reflowing? 10-50 boards a week . . . is that in a single run or broken down into a few boards a day/hour? Do you have a high mix or is it a single product? Are the boards
Electronics Forum | Thu Nov 03 10:49:11 EST 2005 | russ
This is what I would propose, Place and reflow the board without the BGA with your lead process, remove the solder from the BGA pads if you cannot mask off the apertures in your stencil. Then place the BGA and reflow to SAC requirements with a rewo
Electronics Forum | Fri Nov 04 08:10:04 EST 2005 | Amol
Hi all, If i know my field conditions and the required lifespan of the final product, how can i decide what thermal cycle to use for ATC to qualify the product?? I have the JEDEC standards for min-max temps and dwells, but how do i translate them int
Electronics Forum | Thu Nov 10 14:38:27 EST 2005 | Proy
Does anybody here have any information or experience with a DEK249 DEK ALIGN II system made by Cybernetics robotics? This system moves the table to align it to reference images. We are getting an old system working, it is mostly there, but we are ha
Electronics Forum | Thu Nov 10 16:15:52 EST 2005 | 1st Article
Sumote, I suggest DESCO ESD safe het gloves, these gloves have a polyester exterior fabric with woven conductive fibers to ensure static protection. Inner lining constructed of material for use in heat assembly processes, can with stand 200�F maximum
Electronics Forum | Thu Nov 10 16:19:42 EST 2005 | 1st Article
Dear Sumote, I would suggest DESCO ESD safe heat gloves, we are using them at our facility, these gloves have a polyester exterior fabric with conductive fibers to ensure static protection. Inner lining constructed of material for use in heat of 200�
Electronics Forum | Thu Nov 10 23:50:34 EST 2005 | pyramus
Hi everybody! I would like to ask some advice which kind of EMI shielding process is easy to use, economical and at the same time efficient. I've been doing research for different kinds of shielding process to be used in our product. Can anybody gi
Electronics Forum | Fri Nov 11 10:42:59 EST 2005 | rlackey
Thanks Dave, I thought it tasted different - I just put it down to having not travelled well. I'm off to find some Trappist Westvleteren 12. I would ask if there is anything you don't know, but I don't want my illusions (or delusions!) of your o
Electronics Forum | Fri Nov 11 15:54:48 EST 2005 | Cmiller
We have an SPM with manual vision. Its the best manual printer we have ever had. I believe you can get one used for around 10K. If you buy a realy old one, make sure it has the air table lock!!! I think they only made a few that didnt.
Electronics Forum | Tue Nov 15 10:54:16 EST 2005 | stevef100
I am considering buying a Tescon SMT Mounter, model 501. I cannot find a factory field service group for this machine. Does anyone know if there is a field service group in the USA for this machine ? Any other advice or experience with this machi