Electronics Forum | Tue Jun 25 12:10:10 EDT 2019 | slthomas
The profile (temperature curve) is absolutely a function of both top and bottom zone settings as well as conveyor speed, blower speed, etc.. Certainly when you perform profiling you have to consider both top and bottom heaters when you make adjust
Electronics Forum | Sun Mar 22 09:10:54 EDT 2020 | kumarb
Hi Steve. Just came across your post. We are in the same boat with our Ekra X4 printer. Any resolution on your side? We have been attempting to track down a fresh ballast but the original (OSRAM HF 2x36 dimmable with 0-10V) is EOL and no where to be
Electronics Forum | Wed Aug 07 10:38:51 EDT 2019 | slthomas
I hesitate to recommend anyone as a good source just because I haven't personally investigated it myself. There are several manufacturers of recording accelerometers....I just looked at Google and found a couple that I might call on if I was looking
Electronics Forum | Mon Oct 21 18:24:08 EDT 2019 | dougt
I haven't thought about this in a while, wrote up something on how this works here years ago. I think I remember..... As you know the first machine finishes the board and is "ready to send". It tells the second machine this by connecting pins 3 &
Electronics Forum | Wed Dec 04 07:35:08 EST 2019 | proceng1
We also have a few customers that seem to buy the cheapest LEDs available and provide them for the build. We've had complete reels that had obviously been exposed and oxidized. You can try a solder with a more aggressive flux. How long is your pro
Electronics Forum | Thu Dec 26 17:13:43 EST 2019 | rgduval
Doesn't really look like no-clean to me...typically, no-clean encapsulates the solder joint after reflow, trapping any organics. This looks like plain-old water soluble flux, that cooked a bit too much in reflow. As you noted, it cleaned up with
Electronics Forum | Tue Jan 28 11:11:59 EST 2020 | spoiltforchoice
@Stephen The cost here is key, look what I pay for a foil, for established clients that's all I need charge for tooling a new prototype. I can build a pretty decent batch of prototype or low volume boards for less than some places charge for stencil
Electronics Forum | Wed Feb 19 12:59:59 EST 2020 | jerlong2020
Hi John, We had a FLIR system with interchangeable lenses and good thermal resolution for the time (15 years ago). I see the new ones now at a fraction of the cost which we paid and they have better resolution. Amazing how the infrared imaging tech
Electronics Forum | Wed Mar 04 03:32:55 EST 2020 | tamasmagyar
Hi toki, First of all it depends on how much the company would like to invest in such a methodology. Second of all, why would you make a line to be single lane - double line one after each other, is that automotive / medical standard, not to handle
Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice
> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett