Electronics Forum | Thu Nov 09 08:06:17 EST 2006 | cyber_wolf
We are having continual problems with our stencil bindings falling apart in our washer. We use a PMR5000 ultrasonic with Vigon sc2000 cleaning fluid. We cycle them in the washer for about 9 minutes. The fluid sometimes heats up to 105 deg F. Our
Electronics Forum | Thu Sep 21 12:41:35 EDT 2000 | jackofalltrades
Cicuit Repair Corporation 45 research Dr. Havenhill, MA 01832 Phone# 978-374-5000
Electronics Forum | Tue Sep 12 09:47:06 EDT 2000 | Firestarter
Hello there I'm a student from austria and tried to find some technical information of Sanyo SMT machines. But I've been trying everywhere and in the end I've found this forum. I would be especially interrested in the TCM3600 , TCM3000 and the TIM500
Electronics Forum | Thu Feb 19 11:47:06 EST 2015 | dad23honu
I had someone in another forum tell me that my assembly would fail if I had a few solder joints over the 1000ppm RoHS threshold, with all other solder joints within spec. So, I followed up with this illustration. Please let me know what you think.
Electronics Forum | Fri Jan 07 01:05:40 EST 2000 | Dennis O'Donnell
I suggest you check out as many vendor at first as possible. Price varies greatly depending on your requirements. Once you find a company that has a price range that you are comfortable with, most can provide you with their formula so that you can
Electronics Forum | Tue Apr 25 18:51:06 EDT 2000 | Steve Thomas
We have quite a few stencils that either are debonding, have debonded, or we suspect will debond when we can least afford for it to happen. The epoxy is coming loose from the foil, but remains attached to the webbing. All the stencils that are comi
Electronics Forum | Mon Apr 17 18:42:32 EDT 2000 | Russ
Murad, I have just completed a switch over in our facility to no-clean. We used Alpha 609 and 857 paste and wave flux respectively. We currently use Alpha UP78 paste, NR330 wave flux, NR205 liquid flux for touchup and cleanline 7000 wire solder as
Electronics Forum | Thu Mar 16 14:04:14 EST 2000 | Cartman
Greetings. My company has a VOC-Free no-clean wave solder flux with 4% solids. I have a number of questions as they relate to our ICT Fixtures. Currently, we're encountering the following issues: 1.) PM on probes....What is the recommended PM p
Electronics Forum | Wed Mar 27 21:20:30 EST 2002 | davef
There is two major BGA coating camps. * Camp #1: "We require the coating to be under low stand-off devices but with no filleting. So we apply a thinned dip coat first, and then top-off with a proper spray coat" * Camp #2: "We want no coating under th
Electronics Forum | Thu Aug 26 00:27:45 EDT 2004 | valuems
There is so much confusion about this cognex not reconized statement, and it's time to step in. The box on the out side is a cognex 2000 system. The reason for the cognex not reconized statement is very simple. MPM wrote the 4.1y software looking
