Electronics Forum | Thu Dec 07 10:10:49 EST 2006 | Learn from U
Hello, I need your advice..Welcome any input!! Cheers..
Electronics Forum | Thu Aug 12 10:49:22 EDT 1999 | Ray Hare
I am currently involved with designing a pcb which will use 225 pin bga,s The problem with this design is that the components will dissipate a lot of heat and the design we have come up with is use the middle 6 or 7 rows of balls as the grounding,th
Electronics Forum | Thu Apr 08 16:25:38 EDT 1999 | greg c
I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling thank you
Electronics Forum | Wed Oct 29 22:41:42 EST 2003 | msimkin
Our design team have got a problem. We need to either drill out 6 vias/pads for a BGA site, or remove the solder balls form the BGA before they are palced. ( std eutectic) Has anyone used a vendor to remove balls from BGA (0.75mm piutch, ball size ap
Electronics Forum | Mon Nov 19 05:49:44 EST 2001 | Cheng
The BGA solder ball composition is 62/36/2 Sn/Pb/Ag, does any problem exist for the solder joint reliability? And what is the difference on SMTA process between this and the normal 63/37 ball?
Electronics Forum | Fri Nov 07 16:00:45 EST 2003 | Don A
It would depend on how many boards and parts you need to build. I would prefer an etch cut as it leaves the the part intact and you get the strength of the solder joint. It also reduces the handling of the BGA and associated damage from that
Electronics Forum | Tue Jul 25 11:30:47 EDT 2006 | DC
Russ, we had similiar issue on the corner seperation. The board is ENIG and the part is Altera FBGA 1020 (Super BGA) and reflowed by tin/lead paste. Please comment your concern on Altera parts! Is CTE mismatch?
Electronics Forum | Sat Aug 29 09:12:39 EDT 1998 | Dave F
| Hi folks, | Lately I am also having problem with BGA ball problem. | We are finding more and more on X-ray analysis and is very expensive to replace. I know for sure that we could | rework on CCGA but there is no certified process in industry as w
Electronics Forum | Wed Oct 29 23:40:29 EST 2003 | ppcbs
We here at Precision PCB Services, Inc. Perform selective ball removal. We just completed a job today where we removed 4 balls, and then installed traces to dog-bone the pads at two locations on 30 BGA's. An eaisier and more cost effective solutio
Electronics Forum | Fri Dec 02 09:51:05 EST 2005 | whippingpost
I have an assembly that uses several different BGA packages. During troubleshooting we have found that some of the balls in the corners of the BGA's are separated from the underside of the package. The PWA is approx 10�x10� and the components vary fr
