Electronics Forum | Fri Mar 31 15:58:07 EDT 2017 | jutikagokarn
Thank you for your response. We build boards on an SMT line that is shared with other companies too and are currently using water soluble flux based solder paste on both boards. We realized an issue with washing on one of the boards so requested to
Electronics Forum | Fri Mar 31 17:13:04 EDT 2017 | dontfeedphils
Clean everything to do with the print process during the switch adequately and you shouldn't have an issue.
Electronics Forum | Fri Mar 31 18:10:21 EDT 2017 | jutikagokarn
Thanks Phil! I appreciate the response!
Electronics Forum | Fri Mar 31 13:59:21 EDT 2017 | westshoredesign
Need more information. BUT if your strictly considering just the paste change. I would imagine your changeover would be little to no different than changing to the second board if you were using the same paste. Maybe take extra care cleaning your sq
Electronics Forum | Fri Apr 07 09:03:07 EDT 2017 | pavel_murtishev
jng123, Process-wise using one solder paste type is preferred regardless of paste type. If you want clean both paste types in one cleaning machine your manufacturer might have, this potentially could lead to white residue issue due to chemical reac
Electronics Forum | Fri Aug 22 11:22:40 EDT 2003 | jseagle
When I said partial build I should have clarified that all the boards we build are double sided so the plan is to build the bottom side then build the top side as they are ordered. The bottom will be standard and the top will have the options. I di
Electronics Forum | Tue Jul 29 14:12:14 EDT 2008 | grics
For fun AND profit! Just build 'em. Dont design tha POS'S!
Electronics Forum | Tue Mar 02 13:46:06 EST 2004 | Chris
Hi Manjeet Singh We are going to build new building for production area. And i need information about requirements: lights recommend for SMT, ESD, ventilation, building fundation etc. Chris
Electronics Forum | Mon Jan 13 11:29:39 EST 2020 | rlising
We are planning on installing an SMT Line in our building. We own 75% of the building, there is a crossfit gym next door and they tend to drop weights where we can feel the vibration. Should we be concerned with the SMT Line being set up on that end
Electronics Forum | Tue Jul 31 04:45:42 EDT 2018 | robl
Depends on what sort of outfit you are working for, and what you are building. A lot of CEMs are doing Flying Probe or ICT on the boards ahead of investing time building into units or adding parts that prevent access to rework. We have a combination