Electronics Forum | Mon Jun 21 02:15:03 EDT 2010 | ppcbs
We also encountered the crack case in multi layer Ceramic Cap,0603 after touch up. Most failure were on the terminals. Previously, we used 0805 instead 0603.that time, failure were very few.
Electronics Forum | Wed Aug 22 21:00:41 EDT 2001 | dlkearns1
Yes, it is very true and very clean SNAP!
Electronics Forum | Tue Jul 01 07:08:33 EDT 2003 | iman
suggest you check the preheat conditioning in the wavesolder process is sufficient, as this is the main culprit for micro-crack CAPs ?
Electronics Forum | Sat Jun 19 08:32:49 EDT 2010 | davef
Please describe the location and appearance of the crack
Electronics Forum | Mon Jun 21 12:02:36 EDT 2010 | roland_grenier
check your de-panelling process if you are using break-out tabs or V scoring.
Electronics Forum | Sun Jun 27 22:25:51 EDT 2010 | leadthree
*** silly question deleted, there are no 100nF NPO ***
Electronics Forum | Wed Aug 22 18:51:48 EDT 2001 | stefo
Hi ya'll, We may be getting some business here for a small (2" X 2"),ceramic substrated, double-sided SMT assembly. I've done ceramic substrates with SMT in the past, but not double-sided, and as packed as this thing will be... My question is, can
Electronics Forum | Wed Aug 22 21:11:25 EDT 2001 | davef
When it works right, it's a beautious thing. => When goes wrong, you have one board with some of the other board's material, not too coo. Scribed and broken ceramic has bad-butt sharp edges. You'll feel this sticky stuff on your hands, look down,
Electronics Forum | Fri Jul 04 01:32:15 EDT 2003 | rheise
I've seen numerous incidences of mirror image cracking under endcaps in high dielectric material ceramic capacitors due to thermal cycling. If the cracking is deep enough to extent through the plates you can get breakdown and shorting. Section the ca
Electronics Forum | Wed Feb 02 20:00:48 EST 2005 | davef
150*C/min * Determining the distance it takes to lower the delta temperature at the current conveyor speed: [150*C/min]/[25 inch/min] = 6*C/inch * Calculating how much of this 6*C/inch would be spread along the length of the 0805 capacitor: [6*C/inch