Electronics Forum | Wed Nov 06 11:01:40 EST 2002 | blnorman
What's your preferred method of application?
Electronics Forum | Fri Jul 23 15:55:34 EDT 2004 | t.burnette
try dynasolve. http://dynaloy.com/tech_data_sheets/Dynasolve%20218%20PDF.pdf
Electronics Forum | Wed Nov 06 19:59:39 EST 2002 | davef
Consider checking with your CC materials supplier for suggestions. It's to their benefit to help you do a good job using their product. Regardless of your current requirements, consider basing your workmanship on NASA-STD-8739.1 Workmanship Standar
Electronics Forum | Sun Nov 10 22:31:53 EST 2002 | caldon
Staking and Conformal Coating Training Program is provided by Soldering technology. http://www.solderingtech.com contact Mel Parrish or Dan Foster at : Soldering Technology International, Inc 102 Tribble Drive Madison, AL 35758 Telephone: (256) 461-9
Electronics Forum | Wed Sep 02 11:36:22 EDT 2009 | kpm135
Is this an established process that is just now exhibiting these problems, or is this a brand new process you're just setting up? What is the rest of your process like? What is done to the boards before you coat them? Water washed? Solvent washed? Sa
Electronics Forum | Mon Jan 28 08:44:21 EST 2013 | diamondmt
John, In addtion to the cleaning process you may wnat to look at the masking materials you are using as well. Are you using any temporary masking tape? If so, do the dewetted areas coincide? Some of these tapes use a silicone-based adhesive which wi
Electronics Forum | Fri Nov 21 18:56:41 EST 2003 | jsloot
Gun wash is another term used for acrylic laquer thinner. We use DuPont 3642SC. We have much success in its use.
Electronics Forum | Fri Aug 28 08:52:13 EDT 2009 | duso02
Yes, you must thin Dow CC for any spray operations. We use Dow 2577 daily for multiple customers and we always thin it for spray operations and 2577 is considered medium viscosity. Dow recommends using up to 60% solvent (Xylene). Your 2620 is low vis
Electronics Forum | Fri Jan 25 13:41:04 EST 2013 | dontfeedphils
You definitely have to be careful with unsealed components and markings/labels. The best you can do is check with datasheets or find an extra assembly to test it out on first. You can also try slowing down your inline to more like 1-2 ft/min and se
Electronics Forum | Fri Jan 25 15:51:26 EST 2013 | johng
Water soluble process, yes. The machine is old and fixed at 4 ft/min by someone way before me. Looking into ways to reverse that to allow for adjusting the conveyor. Trying to determine how the contamination gets onto the boards. So far testing has i