Electronics Forum | Tue Dec 27 19:15:02 EST 2005 | PWH
Agree with Cmiller. We had a similar prob. with some caps. on a v-scored array. We bought a pizza cutter depaneliser and the problem reduced. It's a "FKN Systek" if you want to look at models.
Electronics Forum | Wed Apr 02 14:32:54 EDT 2014 | nicodj77
Hi Beto, We've been using for more than 3 years the "FKN Systek Model K3000S", It's very simple, cheap and easy to use. So far so good, no issues at all. Good luck!!
Electronics Forum | Wed Aug 29 11:09:01 EDT 2001 | rmerk
Dave, We are using tab nibblers right now, but they have a hard time with round boards. FKN has a model(N200) that shears the tabs off. The cost is fairly low(3K). I just wanted to know if there are any other brands out there that might work on rou
Electronics Forum | Wed Apr 09 14:50:03 EDT 2008 | bradlanger
We use a FKN pizza cutter and found that even with 5mm clearance and the proper orientation of the part larger ceramic capacitors 1812, 1210 would still stress fracture. We have successfully fixed stress fracture problems by adding routed relief slot
Electronics Forum | Tue Feb 04 15:45:16 EST 2003 | adlsmt
If you are physically breaking the boards apart and not using a depanelizer you will always have this problem. I have a machine shop that can make you one for about $3,000.00. You can buy one for around $5K new. Cab,FKN and some others make them. Be
Electronics Forum | Mon Nov 07 20:27:33 EST 2005 | davef
* Singulation (Wand 708.459.2400fax2421, Circuit Technology 708.705.2140fax2141 John Bambule, Pioneer - Dietecs (508)-643-2297 Fax: 2295 Gerry Larson) * Routing (Cencorp 303.530.0891 bill stranathan 303.772.5933x227, 0Z0 Automation 800.366.0401 Chip
Electronics Forum | Thu May 11 17:28:40 EDT 2006 | bradlanger
Steve, We have had the same problem at my company and unfortunately I do not have any good news for you. We are using a pizza slicer type depanalizer from FKN and if the MLCC caps are layed out too close to the edge they still break. We had to add th
Electronics Forum | Wed Aug 03 11:21:34 EDT 2011 | davef
We don't know what you mean by 'high temperature' Board storage racks * FKN Systek http://www.fknsystek.com/PCB%20Racks.htm * US Plastic http://www.usplastic.com/catalog/item.aspx?itemid=24577&catid=745 * All-Spec http://www.all-spec.com/products/
Electronics Forum | Thu Jan 05 15:53:07 EST 2012 | davef
* Singulation (Wand 847-459-2400 F2421, Circuit Technology 708-705-2140 f2141 John Bambule, Pioneer - Dietecs 781-682-7900 F0338 Gerry Larson) * Routing (Cencorp 303-530-0891 bill stranathan 303-772-5933x227, 0Z0 Automation 800-366-0401 Chip Gill)
Electronics Forum | Fri Jun 13 16:23:47 EDT 2014 | esoderberg
I did not see any mention on the inner layer setback. We use 0.025" and have not had problems. Point loads with either a CAB or a FKN can sometimes be problematic. I would search out someone you know that has a fancort industries VDP5. This cuts th
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
115 Pleasant Street
Millis, USA
Phone: 508 376 2500
