Electronics Forum | Tue Feb 26 05:52:35 EST 2002 | mustservices
basically i am looking for a list of parts that would be required to be changed in an annual service for the qp242 and cp642. this information will not be relaeased by astro or fuji america or fuji japan as we are a competitior to astro in the uk, so
Electronics Forum | Tue Feb 26 05:56:14 EST 2002 | mustservices
basically i am looking for a list of parts that would be required to be changed in an annual service for the qp242 and cp642. this information will not be released by astro or fuji america or fuji japan as we are a competitior to astro in the uk, so
Electronics Forum | Wed Jun 23 10:26:53 EDT 2004 | exmaintenanceleader
Grant and all! CP-2 is the oldest fuji as I have been operated. CP-3 is built in 1989 as a new mc. Now 15 mc I now they runs in 3 shift widouth problems when they need countinous runing comes the problems. conroll card and relay contact problems at
Electronics Forum | Tue Nov 25 10:40:50 EST 2003 | Fuji_Dude
Try putting on new springs on the feeders. This a common and frustrating problem with CP6/7 feeders.
Electronics Forum | Tue Nov 25 10:40:42 EST 2003 | Fuji_Dude
Try putting on new springs on the feeders. This a common and frustrating problem with CP6/7 feeders.
Electronics Forum | Wed Jun 27 09:17:43 EDT 2007 | gregf912
I have set the PQ with the CP6 station jigs. It is dialed in to 0.02mm of zero. I also checked station 5.
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Fri Jul 19 11:16:21 EDT 2019 | dman97
And yes if the proper data is not correct it will give you a error message because Flexa cannot communicate with the CP6.
Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
Electronics Forum | Wed Mar 29 23:48:39 EST 2006 | ____
Look on the serial number on the body of the feeder. If it starts with "W" it is a CP6 feeder. If it starts with "K" it is for the CP7. It really doesn't matter for which machine, it all depends on the bucket style feeder. If the feeder is a bucket s