Electronics Forum | Fri Aug 25 14:39:24 EDT 2006 | davef
1 When you peel the solder connection of a BGA, * If solder remains on the soldered surface [eg, component, substrate, etc], it's good. * If some solder remains and some base metal is present, it's marginal. * If no solder remains, it's NG. 2 Try I
Electronics Forum | Tue Nov 28 15:10:50 EST 2006 | M. Sanders
Unfortunately, I don't have a copy of IPC-A-610 D on hand, however, I believe in IPC-610, this �floating height� between lead and pad has no maximum specification restriction. As long as there is no voiding, it is still acceptable for all 3 classes.
Electronics Forum | Wed May 20 17:56:51 EDT 2009 | dyoungquist
I have attached a pdf showing the dimensions for the QFN we placed. First, The pins on the part are not only on the bottom side but also wrap around to come up each of the 4 sides of the part as shown in the side view in the attached pdf. This i
Electronics Forum | Thu May 23 13:24:14 EDT 2013 | rgduval
We agree that it looks like a touch-up process. However, we're not certain that it would meet Class 3 requirements. It appears to be an incomplete solder joint. The outer bit of solder shows voiding to the inside bit of the solder joint, and it lo
Electronics Forum | Thu Jan 18 17:26:30 EST 2018 | davef
I'm aware of no electrical test for detecting voids and air bubbles. If someone was x-raying my boards and saw voids and air bubbles and they weren't happy about it, first thing I'd do is convince them that the boards a within standard. You know some
Electronics Forum | Thu Jan 24 04:54:43 EST 2002 | wbu
Well Greg, I don�t know YOUR 0805 Pads but if you look at the recommended pattern for 0805 in IPC-SM-782 you might notice that the Z-dimension is somewhat about the size of your 1206 part length. With that and assuming that you ask if the results wi
Electronics Forum | Thu Dec 17 17:34:26 EST 1998 | Earl Moon
| Has any anyone established / published quality standards for BGA solder joints? Is IPC-A-610 in process of adding standards for BGAs? | The debate continues. I have felt for some time a maximum 20% voiding is allowable under certain conditions (w
Electronics Forum | Fri Nov 13 08:27:43 EST 2009 | herman
Your customer is very unreasonable to demand void-free BGA SJs. Minor voiding is not a condition for rejection per IPC-A-610D, J-STD-001D, or even J-STD-001DS (Space addendum). Having said that, let me tell you that the voiding has little or nothing
Electronics Forum | Wed Feb 09 21:29:28 EST 2000 | Dave F
Charlie: People cure glue using their paste reflow profile all the time. And most of them are happy. Personally, I�m with Dean and Travis. It�s possible to as you suggest, it�s appealing not to mess with your oven profile, but it just doesn�t s
Electronics Forum | Sat Aug 29 08:43:35 EDT 1998 | Dave F
| Hi, Friends, | Could you please recommend me some solder mask materials and equitements for high quality solder mask? Details such as company name, phone numer et al are welcomed. Thanks! | Have a good day | Xingsheng Xingsheng: Consider the follo
