Electronics Forum | Fri Mar 27 14:37:49 EDT 2009 | hcglitte
Has anyone any experience with pick and place machines from http://www.mechatronic-systems.com?
Electronics Forum | Wed Jul 29 12:58:35 EDT 2015 | pankyb1261
Is there anyone that makes a pick and place glue dot for surface mount chip components (B stage epoxy dot in a carrier tape)? Thanks, Rich
Electronics Forum | Sun Feb 13 16:28:00 EST 2011 | tpappano
Does nozzle #1 lower at all when it should pick up a part or is it just staying in the fully up position? If it does come down, but not quite far enough to contact the part, there are adjusting nuts on top of the head that set the lower limit for no
Electronics Forum | Wed Aug 20 07:37:38 EDT 2008 | cyber_wolf
We are currently in the process of evaluating pick and place equipment. One of the prospects is Juki. In particular we are looking at a KE 2060R. I am interested in hearing you Juki experiences. I am most interested in hearing from those who are h
Electronics Forum | Fri Feb 11 17:02:57 EST 2011 | gabriel1blue
Hello, I have a CSM-84 pick and place machine, and every time a make a programm the location where the part get place is way different from the location on the program which tell me that the offset's are way off, but when I try to calibrate the mach
Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue
Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h
Electronics Forum | Mon Feb 14 05:58:06 EST 2011 | vinitverma
Gabe, You now need to teach the Datum position for the front feederbar and for the rear feederbar too. If I'm not mistaken the datum position for the front feederbar is position no. 21. Just put a feeder on position no. 21 and use the camera to find
Electronics Forum | Sat Apr 12 00:48:35 EDT 2003 | MA/NY DDave
Hi I want to echo the above good advice. Be careful that you either buy a machine from a company that will be here 5 years out or you buy training, equipment documentation and spare parts to cover you. YiEng, MA/NY DDave
Electronics Forum | Wed Aug 20 09:11:33 EDT 2008 | jsims
We ran 3 750's, a 2060, and a 2080 for about 10 years. If you'd like to talk about it offline, give me an e-mail. jsims@schrader.co.uk. We had a positive experience. Good luck. John S.
Electronics Forum | Wed Aug 20 12:49:12 EDT 2008 | charliedci
We have been running a 2060 for 2 years, along with other older juki/zevatech placement systems. We have also had positve results. Fell free to contact me via e-mail for more specific info. charliem@dciincorporated.com
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774