Electronics Forum | Wed Jan 23 12:35:24 EST 2008 | bobpan
Here is a few things to try.... 1. Spin the z-shaft with your fingers and make sure it is smooth and easy to turn. 2. Check your handling in your profile for the part that the software is locking up on.......You cannot go any slower than 40% or this
Electronics Forum | Wed Jan 23 15:13:54 EST 2008 | tbkonrad
It's not the z pickup or profile bot thanks for the help, I think Mike is right. I have used these profiles hundreds if not thousands of times in the past and never had an issue. Also it was different components and different profiles almost every ti
Electronics Forum | Thu May 20 09:47:25 EDT 2010 | pforister
Is this a single head Quad IVc or a dual headed line? if it is a dual line you can swap the align cards in the front bay between the two heads and see if the symptom follows. The card on the far right is a transport card, shouldn't need to swap tha
Electronics Forum | Fri Aug 02 19:45:58 EDT 2019 | bobpan
haha....thanks Steve!!! Nozzle Height of 1 means that you have dust or something in the quadalign lens. You need to clean the lens with alcohol then a dry lint free cloth and if it stays the same....that means the lens has an issue or there is dirt
Electronics Forum | Thu Aug 16 14:29:00 EDT 2012 | bobpan
Sounds to me like a dirty quad-align. If you have cleaned the lens and have the same results then you may have dirt on the inside of the quad-align. The only fix is to replace it or blow it out with an air gun. Unfortunately it is not easy to tell if
Electronics Forum | Fri Jun 30 09:10:12 EDT 2006 | andyspaziani
We are having continual QuadAlign issues with a 1997 vintage QSP2. Every part on the machine has been replaced� now they want to replace the entire head on gantry one. Does anyone have any experience in this area? Sincerely, Andy Micro Air, Inc.
Electronics Forum | Fri Jun 30 09:49:05 EDT 2006 | bobpan
Did they take you into the real time computer and check the display live image ....to actually see if the quad align is good or not???? What types of errors are you getting???? Can you do a machine- calibration- quadalign and get a good reading????
Electronics Forum | Mon Mar 04 17:15:34 EST 2013 | ppminc
I apologize about this. We have sent you over a quote today, we do have all of the parts in-stock and can repair your Quad Align. Please call 9AM-5PM EST or email us anytime.
Electronics Forum | Tue Jun 18 16:03:34 EDT 2013 | cano1912
Looking for a Quad aligner part # 10-22603 for a CP-40LV pick and place machine. Used, refurbished, reconditioned. If anyone has info let me know.
