Electronics Forum | Thu Mar 02 16:06:32 EST 2000 | eLDON sANDERS
Gentlemen, I too have been atacked by that "soldering to gold" and will add my 2 cents. I also had parts that would pop off the board when the fillet looked perfect. After lots of pain, experimentation, and sleepless nights, I solved it through a
Electronics Forum | Thu Mar 02 16:06:32 EST 2000 | eLDON sANDERS
Gentlemen, I too have been atacked by that "soldering to gold" and will add my 2 cents. I also had parts that would pop off the board when the fillet looked perfect. After lots of pain, experimentation, and sleepless nights, I solved it through a
Electronics Forum | Mon Jan 29 10:11:12 EST 2007 | muse95
What does your customer want you to do? I would not want a CM soldering one of my boards with leadfree paste if I didn't ask him to. Whatever you do, get approval first. Two things to consider: If the other components are not rated for leadfree tem
Electronics Forum | Tue Jul 08 18:53:21 EDT 2003 | MA/NY DDave
Hi The answer in general is no mixing of Lead Free with Sn/Pb solder. If you look at reliability data, failures after stress tests and then SEMs, failures occur at grain boundaries inside the joint. Lots more happens. By the way this mixing happe
Electronics Forum | Wed Nov 23 17:50:40 EST 2005 | adlsmt
I am not aware of any such info so you may not get any replys on this but each of these systems is totally different. There is usually not much overlap of what is the right choice for an application. The solder bath machines with fixtures are for hig
Electronics Forum | Thu Aug 21 22:10:07 EDT 2003 | adlsmt
Well, for some reason the board house will pay for the boards but has some issue with paying for the parts on them. Why am I not supprised? Perhaps I have mis-diagnosed the problem. We have found two different board p/n's with the same type of defec
Electronics Forum | Wed Jun 23 14:23:14 EDT 1999 | Cunli Jia
Dave, Looks like you just replied to Ryan's original question, but the message itself shows that the two of you have been going back and forth. Did you copy from your email discussion? Just curious whether something is going wrong with the Forum.
Electronics Forum | Tue Dec 04 10:30:16 EST 2007 | slthomas
Q: The question I have is do they wet in wave solder, and if they do, why does it matter what happens to them in reflow? A: Yes, but somebody here don't agree with me that the glued part need help from wave to get the good wetting. They are wrong
Electronics Forum | Thu Aug 27 10:22:59 EDT 2009 | dwl
We have an opportunity to purchase a Yestech YTV-1000 AOI machine. I am looking for opinions on how well they work and how they compare to the newer Yestech B3 AOI systems. We are a high mix, low volume EMS company. We do not currently have any exp
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411