Electronics Forum | Thu Feb 21 05:34:21 EST 2019 | reckless
I have 2 older genesis machines currently down due to VRM Servo issues. I'm debating whether its better to stock up on some spares as I'm finding spares cheap currently. How often do they go out and how long should they last? Any other parts that
Electronics Forum | Wed Mar 20 14:05:29 EDT 2019 | alexcouto
Hello again, I put the motors 1 and 6 back in their correct positions, but head 1 now gives me a new error. will it be necessary to configure the head 1 motor in any way? I was still checking to see if the belt and the engine would be in position, bu
Electronics Forum | Sun Mar 10 16:16:35 EDT 2019 | sam512bb
Good day All, I was curious if anyone has a source for Juki/Zevatech PM575 Calibration jigs? My machine's placement is off and various a bit and so it was recommended to calibration the laser alignment. Sadly, there are no service centers located a
Electronics Forum | Tue Aug 27 14:19:25 EDT 2019 | surfacemountprocess
They do perform well and are much easier to maintain than impeller driven pumps as there are no moving parts. The machines with electromagnetic pumps do cost more but the extra investment is worth it. One of the main benefits of the electromagnetic
Electronics Forum | Wed Feb 19 09:15:28 EST 2020 | klofgren
@Evtimov My company only recently got our SMT line operational and are just starting to estimate PCBA time. I just wanted to clarify, it seems that your formula will boil down to the number of panels multiplied by the bottleneck operation. Is there
Electronics Forum | Thu Feb 20 08:58:43 EST 2020 | klofgren
I'm mostly looking at the time so that I can schedule. Basically I'm looking at running 1000 panels of project A and then 500 of project B. I have a limited time to get a portion of both A and B to the customer. What I am trying to confirm is whether
Electronics Forum | Wed Apr 10 12:56:17 EDT 2019 | slthomas
I have never heard of editing gerbers with CircuitCam, and don't see any menu options that might lead me towards that kind of functionality. Can you share a simplified description of the process (for example, just the initial menu item selections o
Electronics Forum | Wed Mar 27 16:03:01 EDT 2019 | jdengler
Jim, It's been a long time since I worked on one of these so this is going to be a general idea as to the issue. There's a solenoid valve that is controlled by the E-stop ckt. When in E-stop in stops air from entering and vents the pressure lines
Electronics Forum | Thu Apr 04 20:21:57 EDT 2019 | teejsd
We're testing this PCB in 40C 93RH to see if we get ECM or CAF. We have failure. I traced it back to the vias on the left (signal & gnd)if I can get the picture to load. We have not yet confirmed or denied CAF. I am wondering if I should be concer
Electronics Forum | Fri Jun 07 11:19:14 EDT 2019 | gregoryyork
If you have soldered with HASL finish then the worrying chemistry will be more like NON IONIC. They sit there and attract moisture like mad and any chlorides they hold ionize in the moisture attracted and cause electromigration or SIR issues. They ca
