Electronics Forum | Tue Aug 31 20:41:45 EDT 1999 | Dreamsniper
| | I am looking for a rule of thumb regarding the maximum ramp standard components (chip capacitors) can tolerate without failure during the reflow process. The standard seems to be 3C\second, but this figure is generally derived from the average r
Electronics Forum | Sat Jan 23 16:31:09 EST 1999 | Steve Gregory
| Hi Everyone, | We plan to build, for reliability/experimental/research purpose some CSPs (namely Tessera microBGA 46-I/O 0/75mm pitch and TI 64 I/O 0/8 mm pitch). the various factors that we plan to evaluate are the reliability and assembly concern
Electronics Forum | Thu Dec 06 23:34:25 EST 2001 | Beny
Pls. help. I�ve problem with non-wetting defect at capacitor termination. I have faced this problem at the 2 kinds of termination. One is chip capacitor 0603 that its outer termination surface composed with 100 Sn (Lead free) and another one is Sta
Electronics Forum | Wed Apr 27 01:20:22 EDT 2005 | Frank
Are you sure about your dimensions? .45mil ball diameter and .8mil pitch, and a body size of 16x8mils is really, really tiny. I assume you mean millimeters and not mils? 1mil = 0.0254millimeters If your stencil is 5mils and your ball diameter is
Electronics Forum | Thu Jun 09 13:30:34 EDT 2005 | PWH
I would suggest 7mm thick "Durostone" as a carrier material. Cut lip/pocket for PCB so it is 0.05" thinner than thickness of PCB. Allow 0.010" gap on all sides of PCB. Machine lip to width between 0.050" and 0.100" to support under perimeter sides
Electronics Forum | Wed Apr 04 03:07:16 EDT 2007 | pavel_murtishev
Good morning, Problem definition Poor soldering of thermistors with Ag/Pd termination Background Process: lead free reflow soldering Paste type: Multicore LF300, SAC305 Component type: 0805 chip thermistor, Ag/Pd termination PWB finish: immersion A
Electronics Forum | Wed Jul 02 09:22:20 EDT 2008 | dmunson
Thanks Real Chunks. We currently have an RPS opus selective solder machine that we plan on keeping. It is configured as a 3-nozzle (!) one-pump (!!) point selective solder machine w/ nitrogen preheat. Custom wet nozzles. We use lead free SN100C sold
Electronics Forum | Wed Dec 22 07:20:21 EST 2010 | piter
HI I used both of solder leveling HASL and ENIG, HASL I can recommended for biger pitch is cheaper solder leveling than ENIG but problem with that solder leveling is during the reflow process HASL isn't flat and during reflow process component move
Electronics Forum | Fri Sep 01 15:52:03 EDT 2017 | wyluliwolf
Long story short: I paid someone to convert some older Gerber files to the new RS-274x format for me so I could have them manufactured. I sent them the original Gerber files (RS-274D) along with additional files showing information on the layout. T
Electronics Forum | Mon Sep 17 17:09:32 EDT 2001 | jschake
Flux: No-clean pastes tend to have a wider print process window in terms of print speed and pressure. More importantly, no-clean pastes are more tolerant to changes in temperature and humidity. They also exhibit longer stencil life than water-solub