Electronics Forum | Fri Jun 29 15:28:01 EDT 2012 | davef
Look at this thread [http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=66586 ] that on it's surface has little to do with what you're talking about, but actually may be talking to the root of the issue that you're concerned about.
Electronics Forum | Fri Jun 29 17:17:29 EDT 2012 | davef
Here's a link to one of my favorite threads on measuring glue from the fine SMTnet Archives ... http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=17437
Electronics Forum | Sat Jul 07 08:11:13 EDT 2012 | davef
Search previous threads on this topic in the fine SMTnet Archives, for instance http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=66222
Electronics Forum | Wed Aug 22 12:40:13 EDT 2012 | rway
Have you searched the forum? My guess is no, based on your question. That's where I would start. This is an old topic with multiple threads.
Electronics Forum | Thu Aug 23 17:55:44 EDT 2012 | spitkis2
You need a fitting (brass or stainless steel. As mentioned above, McMaster Carr is one source. Look here http://www.mcmaster.com/#miniature-brass-barbed-tube-fittings/=iz8t1h You will need to know the thread.
Electronics Forum | Tue Oct 16 13:33:16 EDT 2012 | sarason
There was another thread on this recently. But in answer to your question the manual placers are at least half as slow as a container on the desktop and the board sitting in front of you. sarason
Electronics Forum | Tue Dec 18 21:47:14 EST 2012 | jaimebc
So just to update and close this thread, it was the ZFIB board ( the one mounted on top of the theta motor) that was causing the theta motor to error out) Problem fixed. $ 30 dls or so from MYDATA. Hope this helps some one down the road.
Electronics Forum | Thu Jan 03 11:28:11 EST 2013 | beej
I have had a couple like this. It almost seems like they are not threaded correctly. I had to mangle the last one just to get it off.
Electronics Forum | Wed May 29 14:50:56 EDT 2013 | ericrr
I can not think of the name at the moment. But is is a basic skeleton [table top model] type positively no computer driving it, or transistors for that matter. Made in Switzerland, I will get the name and lengthen the thread.
Electronics Forum | Thu Nov 07 07:42:58 EST 2013 | sara_pcb
In continuation of the thread, attached 2d & 3d x-ray pictures of BGA after assembly. Kindly comment.regards, R.Saravanan
