Electronics Forum | Mon Feb 26 12:26:43 EST 2001 | CAM
I'm working a problem and looking for your input. Here the deal: Two sided mix technology board. Test is using unmasked via points on bottom for test points. Our fab drawing states tent via points on top side. First set of board came in with no tenti
Electronics Forum | Tue Feb 27 07:51:59 EST 2001 | jackofalltrades
We use Selective Wave Pallets for the vast majority of our boards with great success. Many of our boards have BGA's and connectors on both sides, which for the most part then require the Selective Wave Pallet. We successfully use pallets up to 10mm t
Electronics Forum | Thu Mar 15 17:19:12 EST 2001 | mparker
Are the tin/lead ratios compatible betweem HASL and wave solder? Probably are, just a remote possibility. Flux application is? bubbler, sprayer? Either way, are you getting good misting, coverage on those teeny 0.5mm test points? If not, then no
Electronics Forum | Thu Mar 29 16:01:44 EST 2001 | johnw
Dave, It gladen's my heart to hear that I'm not the only person with problem's like this, and also that the forum is as good as ever. So route causes and consultants or JAFO's as I call them...Just Another Friggin Obstruction!. I hate the way that
Electronics Forum | Sat Mar 31 14:38:24 EST 2001 | scott
JAX Is right. ROI. How much will it cost to subcontract your assembly for the next 3 years vs. buying your own equipment AND staffing (ie: Process Eng, Maintenance, Skilled operators, etc.). Then, ask how much will it cost you to buy new equipment
Electronics Forum | Fri Apr 13 14:08:53 EDT 2001 | CAL
Proper setup and cleaning of stencil helps ensure repeatable printing performance. Cleaning processes need to be compatible with materials used in the manufacturing of stencils and solder paste. IPC 7525 should also help you out. We here would Inspe
Electronics Forum | Tue Nov 28 12:22:21 EST 2000 | rabell
Garth, the short term solution to your problem from our perspective is to rent the suite, train your people, and send it back. This can fit anyone's budget. We try not to have price stand in the way when the training is required. The only danger yo
Electronics Forum | Fri Jun 08 14:19:35 EDT 2001 | Spanky
Jake, The No-cleans on the market, to me, still aren't as good as OA and water wash. But they have gotten better. The type of No-Clean flux and paste to use really depends on each individual assembly, the machines used, settings, and the environme
Electronics Forum | Wed Jul 25 13:39:12 EDT 2001 | loriannplummer
I have been re-evaluating the way we do our visual inspection process due to its apparent ineffectiveness. We recently tested this by introducing 6 obvious defects on one assembly and gave it to one of our "esperienced" visual inspection operators. 2
Electronics Forum | Thu Feb 03 08:20:49 EST 2000 | JAX
Once you have the capabilities to track a board from the initial stages in kitting all the way out the door in box build the possibilities are endless. You will now have: 1. An exact count of your companies WIP. 2. The exact location of every board i