Electronics Forum | Thu Apr 09 10:58:16 EDT 2015 | swiese242
Does anyone know where to find more places to price feeder blocks for the Fuji CP-743. To change reels and fix feeders. Thanks for any help.
Electronics Forum | Mon Jun 01 09:29:22 EDT 2015 | tnisbet
Did you change the Z-Axis amplifier? Do you have the old black unit or the new retro(blue box)? Have you checked the rear distribution board for a bad or burnt connection? If you haver any further questions please contact george@goppm.com
Electronics Forum | Wed Jul 01 11:48:30 EDT 2015 | sssvajunas
We use component BFU730LX and we have one problem. After reflow transistor base or collector lands are not soldered. Maybe someone have similar problems with this component? We tryed to change stencil pads (smaller , bigger) but problem is the same.
Electronics Forum | Wed Aug 12 12:02:41 EDT 2015 | edwaterfall01
I think the heart beat message comes up if the vision had not initialized. You have changed that already stop I think it is something else. Have you some money a Restore of the Machine Configuration and Mapping and Calibration Data?
Electronics Forum | Tue Oct 06 20:18:27 EDT 2015 | edwaterfall01
With the address of FC107F24 I would look at the Slot 11 UIMC board. Try swapping with another Radisys Board. Check jumpers, changing one jumper only on each board.
Electronics Forum | Fri Aug 07 11:02:29 EDT 2015 | ehess
Can Assembleon Opal nozzles be repaired? I have a few ith chips on the corners of the tips. It appears as though the tips are pinned in the bodies of the nozzles, and that they could be changed out. Thanks
Electronics Forum | Tue Sep 29 14:54:03 EDT 2015 | bmalhi
Voltage retrofit require some wiring changes along with circuit breakers replacement. Please contact serviceNJ@hellerindustries.com to get the retrofit quot.
Electronics Forum | Tue Dec 08 11:26:10 EST 2015 | emeto
ASM would be my top choice for any type of production. solid hardware, combined with very powerful software - you can really place everything with these machines. Juki is nice too. Very durable - good hardware. Software though is not so good.
Electronics Forum | Thu Dec 10 15:14:25 EST 2015 | dyoungquist
We have had very good after sale support from Mycronic (Mydata). They can do high volume (speed) but where they outperform many other brands is their lower setup times. If you do high mix, low/medium volume I would recommend them.
Electronics Forum | Fri Jan 08 07:41:27 EST 2016 | nonford150
Have to second Phil's assessment of Juki. Been running for over 10 years; rarely break; when they do service is quick. Maintenance costs are consistently 15% of our sister companies running Fuji.