Electronics Forum | Mon Apr 23 03:54:16 EDT 2007 | mexx
Now I need to select a AOI machine. There is a problem. My company have a non-stop production process of different PCB. One manufacturing process can be 24 - 48 hours long ( about 2000 to 10000 PCB from different costumers) and so I need to find AOI
Electronics Forum | Thu May 15 06:56:52 EDT 2008 | locostpp
Thanks Sarason, Laser alignment of components was actually our first attempt - it certainly offers speed and accuracy, but purchasing cyberoptics units would blow the budget & getting round their patent not really an option. I've seen the Essemtec
Electronics Forum | Fri Jun 13 10:35:30 EDT 2008 | pjc
Its a bit of an old beast, it was replaced by SE 200 and is now discontinued (since 2004 I believe). Its a decent unit, but hard to achieve good repeatability on smaller deposits. Its also not reliable on small solderpaste below 20mil fine-pitch. Fai
Electronics Forum | Thu Nov 06 15:07:51 EST 2008 | sanrob
Dominik, We have also been looking at MVP locally for micro electronics applications. The 850G appears to have far greater capability with regard to all the backend semi processes, and provides real measurements for our stats systems. I have seen
Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany
Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >
Electronics Forum | Sat Apr 21 07:24:01 EDT 2012 | doremi
Just found from another discussion : “The Yestech (pattern match) is very easy to program and use but it took sooooo much up-keep to keep the false calls to a manageable amount. The CyberOptics (also Omron) is more of an algorithm based type of mach
Electronics Forum | Fri Aug 30 11:31:29 EDT 2013 | nophsem
We have two QUAD 4C working in tandem. 3 months ago the EPCU battery (QUAD # 2) died, then we change it. Then downloaded the MODs from the controller to the assembler(does simultaneously on both machines). All this time we continue to work normally.
Electronics Forum | Thu Sep 05 21:31:36 EDT 2013 | nophsem
Hi: Our machine (QUAD 4C) has a CyberOptics laser 6604033; when initialize at HOME, z-rod descends and doesn't retracts, which makes me think that the laser is misaligned, here's a link to the video recording: http://www.youtube.com/watch?v=W9ma7Zsf
Electronics Forum | Fri Nov 06 02:55:10 EST 2015 | arct1c
Hi, we are looking for 1 or 2 new postreflow AOI machines to replace our old ones and possibly 1 prereflow AOI(we never had pre reflow before). In our company we run low volumes and high volumes. I have been looking at Viscom, Mirtec mostly, Cyberop
Electronics Forum | Fri Jan 22 12:52:38 EST 2016 | newtfly
I agree with 3DAOI.com, in that you should be looking at Cyberoptics. They have a great product if you MUST have both of these processes in line, and if you must have 3D AOI. If you are willing to go offline, and want to get both AOI and SPI in one
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936