Electronics Forum | Fri Mar 07 15:20:11 EST 2003 | davef
O'Connor: IPC-A-610, section 12.4.4 SMT Soldering Anomolies - Nonwetting was added primarily to accomidate OSP boards. Heated flux is used to remove the 'lacguer'. So, you end-up with a copper colored border [or shadow] around the pads, where there
Electronics Forum | Sun Aug 29 19:17:34 EDT 2004 | aqueous
Chen, It is always best to place one�s effort on determining the cause and content of the residue rather than trying to work around it. The first thing you must determine is the nature of the residue. Is it flux? In many instances, the residue is
Electronics Forum | Mon Apr 30 00:49:07 EDT 2007 | Ron Rumrill
Let me chime-in regarding impact pressure. By definition, impact pressure is determined by several factors: 1. The weight of the water (a constant) 2. Its velocity (determined by the GPM and nozzle�s orifice size) 3. The area impinged (determined
Electronics Forum | Fri Mar 26 11:50:47 EDT 2010 | rway
The programming time depends on the system you are using. I use YesTech. It has been a reliable system for catching the majority of production issues. The programming time on this system is around 20-30 min. with a full library, meaning you don't
Electronics Forum | Fri Nov 11 13:52:05 EST 2011 | SheanDalton
What is the size of the low standoff components you find trace wash effluent? and, what is the gap from the board to the underside of the component? If your component has a very low standoff, and/or, a wide footprint, you may want to consider findi
Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech
Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa
Electronics Forum | Wed Jun 17 10:17:12 EDT 2015 | swag
There is. I've done it. Can't remember how the heck to do it 100%, though! We no longer have GSM's and it was years ago so sorry I'm not much help but I'll try. I remember a couple details... I put clear or kapton tape on the part (sticky side u
Electronics Forum | Mon Jan 25 14:26:38 EST 2016 | stevea
You are correct about KY having the lions share of 3D AOI in the industry. They were 2-3 years ahead of everyone else to entry, but the gap is closing quickly as the overall capability of KY does not justify their higher price. On the SPI front, Cyb
Electronics Forum | Fri Apr 28 10:12:55 EDT 2017 | clampron
Hello M, I have been a Mirtec user for quite few years (not dating myself). I had started with the MV-2 system and sequentially upgraded to the MV-3 and now the MV-6 Omni. We had tremendous luck with the MV-3 from a programming and defect detection
Electronics Forum | Tue Jul 03 01:54:42 EDT 2018 | rdhiman1
Reaching out to all conformal coating experts, please help! While setting up conformal coating using the automated atomized spray, we observing issues associated with conformal coating wetting on the following regions: 1) Component edges 2) Metalli