Electronics Forum | Tue Jan 03 13:37:19 EST 2012 | comando
Ok, I'm technical at Napco Security System production factory Dom. Rep. there are 13 line with CP43, IP2, IP3, GL5 etc. Camera #2 don't work at one IP3 and We can't pay Fuji specialist but we have to calibrate it, I chane the camera but i don't know
Electronics Forum | Tue Jan 17 11:10:51 EST 2012 | leemeyer
1. The flat black connectors that you are refering to are for the nozzle changers. 2. The nozzle changers can be mounted anywhere on the feeder base and their position must be taught using the handheld programmer. 3. If you have no power to the feede
Electronics Forum | Thu Feb 16 02:44:03 EST 2012 | fadzril
Dear all, Have anyone deal with X-Out boards? These defects are declared if one cavity or more from multi cavity boards are defective. There have been a request to use these boards in order to reduce the multi cavity board spoilage at supplier. Ho
Electronics Forum | Mon Feb 27 09:31:30 EST 2012 | pauld
Hi Dave, Picture a camera mounted on top of a fixed base that pans 360 deg. back and forth. The motor connects through a circular slip ring board with brush connection. The rings are hard gold and the typical brush material is soft. Unlike the armatu
Electronics Forum | Wed Apr 04 09:20:20 EDT 2012 | acsscott
I have continued to try and make this work, but I've had no success. I have tried everything that everyone has suggested. It might be the component height, but I can't change that. I guess I could increase the resistor thinkness, and add some heig
Electronics Forum | Fri Mar 09 15:13:49 EST 2012 | davef
Care must be taken to not apply an excess of material, as the adhesive will flow under the device during placement and curing, and could cause a short. Printer setup: * Don't worry about stencil thickness. A wide range of stencil thicknesses (typic
Electronics Forum | Mon Mar 19 08:11:51 EDT 2012 | abielectronicsltd
Hello. Could anyone tell me what kind of connectors these are on these cables & where to get them from? They are for ribbon cables to mount 3M DIL test clips to ribbon. I have tried contacting 3M but they don't seem to want to respond. These connecto
Electronics Forum | Mon Apr 30 08:34:08 EDT 2012 | almoore
We use a small surface mount connector that has two alignment pins to ensure proper alignment. It works fairly well. I'm thinking that this simple alignment solution might work well with lead less parts like a BGA or QFN. I can hand assemble QFNs
Electronics Forum | Mon May 21 09:00:19 EDT 2012 | mosborne1
Try switching to a polymer nozzle. Your machine manufacturer may sell them on any machine shop can mill you one. Also check to see if your pick and place had a puff off function. Some older machines have a mechanical adjustment on the mac valve used
Electronics Forum | Wed May 23 18:53:20 EDT 2012 | stentech
Pick and place is not my area but I did have a customer a while ago with a similar problem. He did try different nozzles and air pressure. They use Nano protek on thier stencils. He wiped the nozzles with Nano Protek and the problem dissappeared. Onl
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
