Electronics Forum | Wed Jul 02 03:54:03 EDT 2008 | dilogic
HP300 used a file format called LIF (for floppies). If you can copy the software to the floppy, there's HP utlitity for reading LIF disks on the PC. For details look here http://www.home.agilent.com/upload/cmc_upload/All/5306OSKR-MXD-5601-040163.pdf
Electronics Forum | Tue Jul 01 18:51:06 EDT 2008 | proy
I am learning to use this SPM now, and I found that when I go to define a board size, you select the parameter box, then the parameter (like Board size X....) - I can only change the value by rolling the mouse ball, the side bar which is shown in the
Electronics Forum | Mon Jul 07 10:38:53 EDT 2008 | realchunks
Biggest differnce is tooling. Tooling cost with a fixed pot - no tooling cost with programable "moving"pot. There are various way to control peel off with a moving pot. Depending on the machine, you can use either the Z axis or the actual pump spe
Electronics Forum | Mon Jul 14 13:36:03 EDT 2008 | stepheniii
Most "non-moving pots" are tooled piece of steel > with pockets full of solder. At least that's > what the marble in my head understands it be (?). Our Selective solder machine has a fixed pot with a fountain in the middle of it. The table move
Electronics Forum | Tue Jul 08 18:13:03 EDT 2008 | arminski
How do you position those 3 items in your process after post-reflow? Is it possible to combine them as one process step, two or three processes? I am looking at the conflict of Interest in collecting Defects data for analysis. Can it be Touch-up as
Electronics Forum | Mon Jul 14 10:17:27 EDT 2008 | dwelch123
Ed,,You need a temp gauge to verify tip temp and if it's a digital control iron and it's off usually just junk it. If dial control you can loosen knob and adjust to reading.If you need to know type of gauge and manufacturer drop me a line
Electronics Forum | Mon Jul 14 11:33:35 EDT 2008 | stepheniii
It depends on the type of iron. Some of ours have a little plug you pull out that exposes a pot that you tweak to make the temperature of the tip the same as the reading. Others can't be adjusted and the heating element must be replaced if they don't
Electronics Forum | Wed Jul 16 10:15:53 EDT 2008 | chrno522
I would like to spend around US $30K - $50K, I've got an offer for EKRA E1 inline Semi Auto for $35K USD but EKRA can't fit the 29" stencil frame. Is this EKRA any good? What is the best machine to buy for my budget? any suggestions is greatly apprec
Electronics Forum | Sat Jul 26 07:31:14 EDT 2008 | bobwillis
We have created a new online free database on process defects at NPL which you can search. http://defectsdatabase.npl.co.uk There are many reasons for solder balling on wave and reflow and examples are provided. You could always use the database t
Electronics Forum | Wed Jul 16 19:48:35 EDT 2008 | emti
Hi Thanks for Replay, As I told you our Company sales man making all our Turnkey PCB Manufacturing orders for us, and as an SMT Engineer, i m very well satisfied with the boards. The problem is I directly don't know anything , like where they makin
