Electronics Forum | Tue Feb 19 11:34:04 EST 2002 | AndyC
Do you mean middle height slice ? . This is a term used to describe the x-ray taken at a mid-ball position on a BGA ball , ie , the "fattest/widest" part if the ball . This is generally done to see if voids contained within have led to fracture acros
Electronics Forum | Fri Feb 22 15:16:24 EST 2002 | rkevin
Bet your using tin/ lead plated components with a lead free Cu/Ag/Sn alloy. It leads to intermetallic cracking. Wow didn't anyone tell you to check the archives yet, It seems to be the answer given to everyone. Why have an interactive site if you alw
Electronics Forum | Mon Feb 25 08:10:47 EST 2002 | jax
Eric, I assume you are talking about "VOC" as in (MXL-350VC "VOC FREE" Swing Spray Fluxer) since I have never heard of "VCO" used when talking about Spray Fluxers', or anything else for that matter. This is copied right from the SMTnet Library: VOC.
Electronics Forum | Mon Feb 25 21:13:12 EST 2002 | davef
No, none of us can tell you what is the acceptable level of halide content or contamination in flux residue. The level of harmful residues on your product helps determine the reliability of your product. We know nothing of your product, its custome
Electronics Forum | Mon Feb 25 17:07:15 EST 2002 | peterson
We are using a Panasonic MPAV2 to place some QFP's. Can someone please help me with a problem we are having with coplanarity! The machine is "dropping" parts due to coplanarity issues. What settings should we be looking at in order to eliminate the
Electronics Forum | Sun Mar 03 22:15:13 EST 2002 | caldon
RPS (Robtic Process Systems - I think) Makes a system called a Wet Balance tester. This machine is useful for Solderability on PCB sections and Components. Also for more info please go to http://www.empf.org/html/empfset.htm and down load Decemeber
Electronics Forum | Tue Mar 05 03:13:52 EST 2002 | rkey
hi, yes i know those machine'a are made by YAMAHA !! Philips sels them under a different name. i know this machine (PHILIPS, YAMAHA) uses UFO's and BRD Files! It would be great sending us the software including the manuals! Thnx alot pal. Best rega
Electronics Forum | Tue Mar 05 14:35:15 EST 2002 | slthomas
I don't know much about it, but I know that we at one time had the capability. We don't use it now, however. We have 3 MSHII's, and apparently there's a card that needs a dip switch turned on (the MMC card, maybe?), and a new firmware rev. if they
Electronics Forum | Tue Mar 05 16:23:27 EST 2002 | msimkin
Hi, I currently use a package produced by a New Zealand company called SMS Line Control. This enabled me to control 3 differnt lines (with different machinery in them) and have them fully networkable. Maybe they would be able to solve any networking
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
