Electronics Forum | Thu Jun 11 06:25:28 EDT 2015 | gorge
Hi, We are a professional quick turn PCB prototyping and low-volume production manufacturer located in China. Professional PCB prototype with guaranteed quality for PCB prototype, We can produce high-quality PCBs with competitive price. *convenie
Electronics Forum | Wed Jun 17 01:02:16 EDT 2015 | armandogomez
Hello Had a similar problem way back with the hydra, first go to the service program manually activate the hydra camera then move the Xwagon to place the hydra ref plate over the hydra camera and check first if the camera works, second the image you
Electronics Forum | Wed Jun 17 10:02:38 EDT 2015 | rgduval
Having some issues with our GSM picking parts that are delivered by the PTF off center; and wondering if there's a relatively painless way to calibrate where the head goes to pick the part on the belt. Near as I can see, the PTF is picking the parts
Electronics Forum | Wed Jul 15 17:47:59 EDT 2015 | mikekeens
I've read different views on this but the best results i've seen are from when the misprinted PCB is put directly into an automated 'spray-in-air' cleaning machine and cleaned using an appropriate cleaning chemical. Any attempt to manually clean the
Electronics Forum | Sat Jun 20 14:26:41 EDT 2015 | lord_anar
Hi all. We have MYDATA MY5OO Jet Printer. We had already used it before. But now when we start to production again after a long time I have problems with CAD Conversion. I forget all of the information about how to start working on jet printer and MY
Electronics Forum | Mon Jun 22 10:54:44 EDT 2015 | seanrou
In our production facility, we currently have 3 different makes of SMD machines. I am wanting to look at solutions that would allow us to control kitting, traceability, etc globally across all the machines. This would need to be a standalone system t
Electronics Forum | Tue Jul 14 01:53:51 EDT 2015 | buckcho
Hello, i have been using itac for half an year now, but I am not satisfied. It is not so flexible, and its very expensive (I think). The best way for me is to hire two software specialist and make your own system (bare in mind that you have to let th
Electronics Forum | Tue Jun 30 05:06:22 EDT 2015 | CyberOptics Corporation
Hello Shim, CyberOptics offers a complete range of 2D and 3D AOI systems to suit a wide spectrum of applications. You can find out more about our inspection solutions at http://www.cyberoptics.com Please feel free to contact our Sales team or dist
Electronics Forum | Tue Jul 28 17:27:21 EDT 2015 | anvil1021
Bottom Line no matter which machine you pick make sure you have a dedicated programmer that is completely trained on the machine you choose. Every machine has its strong and weak points it is the understanding of how the machine functions and how to
Electronics Forum | Wed Jun 24 21:34:02 EDT 2015 | kennyg
I am struggling with a water wash process for a very small (1"x1") PCB. It has components that are very esily damaged by contact. I'm stuck with wash. I know, I know, but no-clean isn't an option. We put the board in s compartmentalized wash basked
