Electronics Forum | Mon Jan 09 23:24:47 EST 2017 | saju86ece
Hi, We are doing pin in paste reflow process in one our product ( but paste printed on bottom side of the board and top side will be assembled through hole component)in which faced cold solder issue in THT capacitor location after reflow. The solder
Electronics Forum | Mon Sep 24 12:58:31 EDT 2018 | vincentl
We are attaching 0.50mm diameter SAC 305 solder balls onto 0.38 diameter Au plated pins placed at a 0.80mm pitch (pins are pressed into a plastic insulator). A tacky flux is then stenciled onto the pins using a stencil with.a 0.38mm diameter aperture
Electronics Forum | Thu Jun 13 09:39:43 EDT 2019 | don_julio
Problem is I don't have a mesh belt (lesson learned). Our conveyor is pins. If I laid some scrap pcb's spanning the conveyor pins on the long dimension of the board, I'm confident it would sag. We get a bit of sag today in our 1.6mm thick boards whi
Electronics Forum | Mon Jul 22 09:53:13 EDT 2019 | kylehunter
Hey all! As background, I recently purchased a full SMT line for my company. We have a DEK 265, an assembleon opal xii, and a Heller 1500. Currently our jobs are leaded, and the heller is working perfectly. An upcoming job that we are potentially g
Electronics Forum | Wed Dec 23 12:24:37 EST 2020 | ilavu
1. Palm down the GSM and open the safety cover to check input voltage +12VDC (at KDC2 3PL pins 2 to 3) and output voltage +5VDC (at KDC2 2PL pin 4 to 3) at the DC/DC converter. The DC/DC converter is located inside the control panel assembly ("Nose c
Electronics Forum | Fri Jun 25 01:11:31 EDT 1999 | Vinesh Gandhi
| | | Recently, there has been an upsurge in the Pin Hole/Blow Hole problem in our wave soldering process. We are baking the PCBs for 2 Hrs. at 125 degree C. The Wave Soldering profile seems to be O.K. Still the problem is persistent. Can somebody
Electronics Forum | Tue Dec 04 08:34:07 EST 2007 | davef
We no advice to give you on the topic, but maybe while you're waiting for others to reply, reading a trade journal article on the topic might help. Below is a link to "Pin-in-hole reflow (PIHR) and lead-free solder joints" by David Bernard, Bob Willi
Electronics Forum | Wed Sep 22 10:03:07 EDT 1999 | Boca
| | | | i'm sure everyone has run into this at one point or another. I have a thin pcb .025 that is single up that has to be built on a pallet. does anyone have any tricks to the pallet design that will help to hold these boards down during the s
Electronics Forum | Sat Mar 13 19:34:17 EST 1999 | John W.
| | Okay, I would like to hear everyones ideas for PD naming conventions for FUJI. We are trying to use your basic names "3216_CAP" to a "MQFP208AD" But it is way out of control. Different part sizes, and vendors make it very tough to keep it all
Electronics Forum | Thu Aug 20 15:29:45 EDT 1998 | D. Lange
Re: Questions #2 Are you having solderability problems with that arrangement? Sounds like problems could be solved at the wave solder. If the customer has already spun pcb then sometimes for low volume it would be easier to correct the problem at wa
