Electronics Forum | Mon Jan 12 09:44:00 EST 2015 | rgduval
Oh yeah, I've seen this before! Generally, if the hole sizes are correct (including plating), and the PEMs are within spec, we've found that this is most commonly caused by insufficient support of the PCB during insertion. If you can eliminate supp
Electronics Forum | Fri Mar 06 10:11:02 EST 2015 | eezday
Hello Adriano, I see that you have ran several test with differnt valumes of solder paste which is a reasonable path. Have you run any solderability tests? Head in pillow is usually considered a solderability problem. Also, what type of plating a
Electronics Forum | Mon Mar 23 08:04:51 EDT 2015 | kris1128
Has anyone out there experienced selective soldering of a shield that is galvanized rather than tin plated? Our supplier is worried about tin wiskers with the bright tin finish. Soldering with SAC305 and a pretty weak no-clean flux. Sorry, I don't k
Electronics Forum | Wed Jul 15 10:25:26 EDT 2015 | shahrat
Hi brothers, Can anyone give me some clear ideas that which surface finishing is the best for PCBs used for LED TV motherboard production? Some says that OSP is good but it is not good for double sided board. So I am a bit confused in between HASL,O
Electronics Forum | Thu Aug 27 09:58:45 EDT 2015 | fcmtechnician
Hi Take out the steel plate, is acting like a trampoline, oscillating with the machine movements! Is the machine leveled OK? The installation guys use 0.02/1000 Spirit Level ( leveler )? Let the machine on the concrete floor, try first on the top o
Electronics Forum | Sun Nov 22 18:03:38 EST 2015 | ttheis
Hi Deni- Thanks for the reply. I'll try to figure out what vision system is on it. I know it has two 5.3mil cameras front and back, UPS 3.2.2c os/2. Where do I determine the type of vision system; in the computer or harware spec plate?
Electronics Forum | Tue Jul 05 18:13:03 EDT 2016 | padawanlinuxero
As my fellow members are saying this is a bad mfg process, you need to talk to your supplier to see if theres something contaminating the ENIG plating, this is a very critical issue you must act on it before some problems arise in the field where can
Electronics Forum | Tue Aug 02 10:46:03 EDT 2016 | proceng1
We are getting more and more customers wanting LED boards built on White Solder Mask. Well our printers do not get as much contrast between the white mask and the plated fiducial pad, and often the camera only sees white. Other than playing with
Electronics Forum | Wed Dec 14 12:34:56 EST 2016 | cy4223111
Hi all, Recently, we are trying to do wire bonding between a 75 * 75 um pad on a chip and substrate with 150 um height difference, but when completing wire bonding and the wire bonds on pad and substrate, the pad will get out of the chip easily
Electronics Forum | Tue May 23 03:40:20 EDT 2017 | bukas
the problem I had with pump was that turbine intake was eached by alloy. when I repaired intake, it was a irregular hole about 32mm in diameter, mechanics welded piece of plate with a 24mm hole (that was a factory size) we had to reduce pump speed fr
