Electronics Forum | Tue Apr 24 12:44:11 EDT 2001 | Steve
Take a look at J-STD-003, Solderability Tests for Printed Boards. This may help you create a procedure.
Electronics Forum | Mon Apr 04 08:55:05 EDT 2005 | jimih280
the pin manufacturer usually recommends the proper hole size. the hole diameter should be from .001" to .003" undersize depending on the design of the contact area on the pin.
Electronics Forum | Thu Jun 16 22:07:16 EDT 2005 | davef
Chris As you imply, testing board and component solderability prior to assembly is preferred. * ANSI/J-STD-002 - Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires * ANSI/J-STD-003 - Solderability Tests for Printed Boa
Electronics Forum | Mon Jan 23 20:58:08 EST 2006 | davef
J-STD-003B - Solderability Tests for Printed Boards is currently a "Working Draft". Look here: http://www.ipc.org/status.asp
Electronics Forum | Wed Feb 07 11:27:25 EST 2007 | asoe
I just wonder anyone had the idea of solderability test for through hole by using a wetting balance equipment? I read the jstd002/003 however my feel is now our machine (metronelec st60) is not capable of this test?
Electronics Forum | Mon Mar 05 22:42:30 EST 2007 | davef
On your ENIG thickness requirements, search the fine SMTnet Archives for previous discussions, like: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=33661 On determining if your board will solder properly: ANSI/J-STD-003, Solderability Te
Electronics Forum | Tue Jul 24 13:41:41 EDT 2007 | jdumont
We just measure the coupon before and after. We are always btw .002" - .003" acrylic. No auditor will say a word if you are doing this much control. Unless its NASA I suppose..... we've never had a problem with any of the avionics guys doing this tho
Electronics Forum | Thu Jul 03 17:29:42 EDT 2008 | mikesewell
Re: item 3 - there are ultrasonic thickness machines (Panametrics makes one) that can measure coating dry with a small transducer head. A little pricey for ones that measure reliably in the .003" +/- .002" range.
Electronics Forum | Thu Nov 10 10:15:40 EST 2011 | davef
J-STD-003 describes the test methods and gives guidelines for assessing the solderability of bare circuit boards
Electronics Forum | Tue Feb 05 15:31:58 EST 2013 | davef
As a quick response, look here: http://www.cotorelay.com/images/stories/coto_wp__reliability_ver_003.pdf We receive no benefit from, have no investment in nor know any employees of the company listed above. BR, davef