Electronics Forum | Wed Oct 14 16:58:59 EDT 2015 | pmcg
I've no idea what you mean by Mach3 and Jog Pendants? The SPA-400 is easy enough to program with the PC software application.
Electronics Forum | Fri May 11 13:58:59 EDT 2018 | aj
Hi all, Is there any Mirae 1030P users that could help us out with some questions we have? Thanks...
Electronics Forum | Wed Jun 09 23:58:59 EDT 2021 | SMTA-64387687
The electrical test, on those older machines, wasn't very exact. Try to expand the tolerances, 25-30% for caps and 10% for resistors, and see if that solves your problem. Also, if I remember correctly, if you go into the layout and single-place the c
Electronics Forum | Thu Mar 03 09:58:59 EST 2005 | Marc
The gears should be wet. This gear box acts like a rear end axle. Not sure of the lubricant but it is like a red transission lube, comes in as complete unit from supplier. You can't get the lube from Speedline since it is sold as a complete unit.
Electronics Forum | Wed Sep 07 04:58:59 EDT 2005 | Rob
If by singulation you mean depanelising then the following: Press with steel rule die & plate - approx $500 for tooling Not particularly accurate, and needs replacing regularly, can be modified very easily Press with die tool - approx $10k-20K too
Electronics Forum | Wed Dec 05 10:58:59 EST 2007 | shrek
Mr. Long, me lad, I don't follow. You say stuff about RoHS and all the banned materials covered by RoHS, but what is your theory on how banned substances can get on a RoHS board if you are running both Pb and Pb-free on the same oven?
Electronics Forum | Wed May 20 08:58:59 EDT 1998 | Dave F
| I pretty much have my old DI water problems solved, | but now (of course)I have new problems: | I was monitoring the degradation of water quality to | see how long it would take to get down to 2.05 Megohms | (is this too high to change the tanks?-
Electronics Forum | Wed Sep 01 14:58:59 EDT 2004 | Shean Dalton
To address the last sentence of the recent posting, Austin American Technology does have experience with board cleaners as described. More recently AAT developed a cleaning system simliar to your description called the AquaBatch. The AquaBatch was
Electronics Forum | Thu Dec 10 05:58:59 EST 2009 | gregoryyork
Best to use Tin treated with TinP Additive. This ensures the Tin is fluid enough to Dissolve any Leaded residues. Run the machine for one hour at 275C then take out wave former and as much of the workings of the pot as possible. Then start bailing ou
Electronics Forum | Wed Sep 18 14:58:59 EDT 2002 | Claude_Couture
Just to add my 2 cents on the adjustment of pitch on MPA feeders: True: Panasonic do not make it easy to change the pitch on MPA feeders, the thickness of a metal part is what sets the pitch. My solution: for example, I get a 24mm X 12mm pitch MPA
