Electronics Forum | Wed Sep 30 13:49:06 EDT 2020 | emeto
I would prefer wave for this parts, but if it not an option, cut 6-8mil stencil and double stroke it on the printer. All the rest is adding additional steps/labor/cost that is not worth it.
Electronics Forum | Sun Jan 17 13:05:33 EST 2010 | smellew
Rodrigo, MCS PC Pin 1 To Pin 2 Pin 4 To Pin 5 pin 6 To Pin 3 Local Links MCS 9 Way Male Link 2 & 8, 3 & 7 PC 9 Way Female Link 7 & 1, 4,6 & 8 If you need anything else let me know Regards Llew
Electronics Forum | Tue Feb 28 17:45:56 EST 2012 | acsscott
So, got the Topaz X up and running. It has (4)FNC nozzles on 2, 4, 6, 8, and (4)74A Nozzles on 1, 3, 5, 7. We are trying to optimize it to pick up 8 components, then move over the camera, then to the PCB and place them. In the Mount data, we load
Electronics Forum | Tue Mar 21 17:32:48 EST 2000 | Charles Barker
Greetings all you knowledgable SMT persons! 1. Typically, for multi-layer (6-8 layers), FR4, SMT boards stored in an air conditioned environment at about 50+/- 10% RH, how many months (or years) would you allow to pass before you would recommend bak
Electronics Forum | Sat Oct 20 09:19:24 EDT 2001 | davef
"Phased out" is not the correct term. " Not economic" might be more appropriate. Check: R&D Technical Services (Centech) 12261 Suite A Nicollet Ave S Burnsville, MN 55337 (612) 707-1931 fax 6739 sales@rdtechnicalservices Further, Graham Naisbatt
Electronics Forum | Fri May 05 16:04:41 EDT 2006 | gregp
It sounds as though you are looking for a single machine that can do the entire component range. The C5 series from Contact Systems competes directly with the machines you mention. The Mydata machine will do 6-8K CPH real world with the hydra head
Electronics Forum | Thu Sep 06 21:55:36 EDT 2007 | duyhoang
We're running 3 CP3's but I think they doesn't meet Flexa. Flexa is only connected when CP3 has Version more than 6.9 . We only have ver.1.4 and 6.8. I really don't know what to do now. Anyone helps me?
Electronics Forum | Wed Jan 11 06:29:47 EST 2012 | cbeneat
We have Vectorguard frames we've been using for about 6-8 months. We've seen no leakage on ours. The frame has written on it an operating pressure of 101.5-116.0 psi,our pressure is set a lot lower, 50-60 psi, as we also use another frame that can'
Electronics Forum | Mon Oct 12 15:51:47 EDT 2015 | davef
IPC-A-610E-2010, Acceptability of Electronic Assemblies, 8.3.4 Castellated Terminations talks to the acceptability of solder connections on components like yours. It’s tough to say from the pictures, but I’d say your issues are: Missing solder: Plat
Electronics Forum | Wed Apr 10 22:46:04 EDT 2002 | davef
On SMTnet, we've discussed the the frailties of controlling paste height, when volume is a more telling measure. Sometimes if you seperate too quickly, the paste tries to stay attached to the aperture walls. This creates a 'U' shaped deposit with r
