Electronics Forum | Mon Jun 18 08:14:20 EDT 2001 | Carl Evans
If you require several changeovers per shift the quick connect closed loop pump option would be your best bet.You can change between pump and blades within minutes. Hoever if you have several different size pumps a simple pump switch over would be pe
Electronics Forum | Wed Jun 17 13:55:13 EDT 1998 | MAURICE MCCLAIN
I AM LOOKING INTO PURCHASING A STENCIL CLEANER FOR OUR SURFACE MOUNT PROCESS. WE USE ABOUT 6-7N STENCILS PER DAY, AND WE'RE USING A NO-CLEAN PASTE. WOULD LIKE A CLEANER THAT CAN USE ALCOHOL AS A SOLVENT, HOWEVER I AM OPEN TO SUGGESTIONS. DON'T REA
Electronics Forum | Thu Jan 10 12:11:00 EST 2002 | Bo Apostolache
Dmitry, we are a contract manufacturer in Southern California. We have the capability to manufacture the above mentioned board assembly. As a rough estimate, we would be able to assemble your board for somewhere between $6-$7, depending on quantity
Electronics Forum | Fri Sep 13 14:37:24 EDT 2002 | norvica
I have an Altai mains adapter. Input 240v ac Output 3,4.5,6,7.5,9,12 v dc 300mA MAX It has a polarity plug where you plug in the lead. I want to run a 3v Fuji film digital camera. Do i plug in the plug so the + goes to the - or the + goes to the +
Electronics Forum | Sat Feb 10 09:36:52 EST 2007 | davef
Choices are: * Run a Cp, Cpk capable profiler through the oven. * Review the results of your supplier's process qualification that would include Cp, Cpk on their oven. Handspring contract [REV. 6 - 7/1/99] with Flextronics says: [snip] 4. Process Ca
Electronics Forum | Tue Apr 03 03:31:51 EDT 2007 | chrissieneale
Apparently because the machines are old and prone to break down they do all the printing for the day (maybe 6/7 different board types) up front. This doesn't make any sense to me - if the machine is going to break down, the machine is going to brea
Electronics Forum | Fri Oct 17 20:26:21 EDT 2008 | diesel_1t
If is IP-1, is using SMD2 vision instead of SMD3 (CPIV-IP3, CP6,7, etc) if so, you must use Vision Number instead of Vision type... if you're using fuji flexa just press F1 on vision number and you will se most common vision numbers depending on shap
Electronics Forum | Mon Apr 27 11:29:06 EDT 2015 | chris_jayconsystems_com
When I do the adjust to make sure the vision and tolerance is working it works perfectly. But if the machine runs a board I am riddled with this. I have checked the vacuum levels on all the heads and they are within where they are supposed to be for
Electronics Forum | Mon Aug 11 17:48:39 EDT 2003 | Brian W.
Assuming you are working to IPC standards, are you working to Class2 or Class 3? Class 2 has an exception to the 75% barrel fill (para 6.3.1, page 6-7). "As an exception to fill requirements of Table 6-2 on PTHs with thermal planes or conductor
Electronics Forum | Wed Jun 30 18:12:59 EDT 2004 | crios
Thanks for the information. davef, I will search for and review the Ion Chromatography for Ionic Cleanliness test method. This definitely is the test I want to perform. Do you know what the IPC specification is using this test method? The outside