Electronics Forum | Wed Jul 01 10:32:01 EDT 1998 | Eric Klaver
| How can I reach Tesa? I've tried to find a website that contains some useful information but no luck. | By the way, Siemens has stonewalled me regarding their tool/material. Seems to be reserved for Siemens | users exclusively. Joe, The address
Electronics Forum | Thu Jun 14 10:50:38 EDT 2001 | Dave G
Are you changing heads because of pastes or just changing widths ? Changing the head w/o cleaning is fairly straight forward. (Actually it's Pretty easy.) We have two widths - 8" & 12". We switch twice a day with very few problems but, we don't have
Electronics Forum | Tue Oct 26 22:24:21 EDT 2004 | KEN
More zones = higher thruput. Is it better to have (8) 12 inch zones vs. (7) 15 inch zones? One thought might be more parts = more cost = more potential for failure. I have a bunch of BTU's with over 12,000 heating hours of combined opertion. I
Electronics Forum | Fri Jul 29 13:42:38 EDT 2016 | gregp
The standard you need is EIA-481B. It details the taping of components from 8mm tape up to 200mm tape including component orientations. 8, 12, 16 and 24mm tape has the sprocket holes only on one side so it is easy to determine the proper orientatio
Electronics Forum | Fri Aug 05 08:15:39 EDT 2016 | jdengler
The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs
Electronics Forum | Sat Feb 16 07:21:17 EST 2019 | SMTA-Joe
I am experiencing a "tarnishing" issue on PWB traces that may be causing problems with component reflow. The PWB traces are made to the following spec: SOLDER MASK OVER BARE COPPPER WITH SILVER IMMERSION PLATING PER IPC4553, PLATING TO BE 8-12 MIC
Electronics Forum | Sat May 04 13:06:40 EDT 2024 | erikfriesen
We are using these Cover tape extenders https://smtsupplies.com/products/cover-tape-extenders-8-12mm-yellow-500-per-box The problem we have is that we have on 8mm feeders is that these leaders are harder plastic, and we have to put fishing weights o
Electronics Forum | Wed Jun 10 22:19:31 EDT 1998 | Dave F
| | The Tesa company delivers Splice Tape for 8mm, | | 12mm and 16mm. Also special splice tape for 8mm | | paper tape and some splice tools as well. | | Siemens uses for large tape a 'staple' but might | | be patented and then cannot be used outsid
Electronics Forum | Thu Mar 01 10:10:30 EST 2001 | Stefan Witte
Angela, besides the sense or non sense of six sigma and related meetings, you will have to break down the component feeding issue into several sections, which are all impacting the feeding reliability. 1. Component dimensions 2. Tape size 8, 12, 16
Electronics Forum | Thu Dec 15 06:20:11 EST 2005 | rlackey
Hi Liza, We've seen it occaisionally in house on Universal GSM 8,12,16mm but not on Fuji (except when a feeder's not used for a while). Also on 44, 56 & 72mm (the smaller vol parts I mentioned earlier. It tends not to affect the Hoover Davis Feeder
