Electronics Forum | Fri Mar 03 16:11:07 EST 2000 | cpitarys
Yes it is Ok and some folks ae doing it now, but unfortunatly IPA may not be the best solvent for this application. Take a small vial of the ipa and put some of your smt adhesive into it, shake it up and watch what happens, now step this up onto a l
Electronics Forum | Wed Oct 10 19:02:38 EDT 2001 | mparker
Why not quantify the amount of time spent taping apertures every time you want to use the stencil vs. the cost of a new stencil (about $300, usually)? Look for problems that are created by the blocked aperture method - is there rework down the line t
Electronics Forum | Tue Sep 16 23:58:03 EDT 2003 | iman
interesting! I recently invested a small personal fortune into books nad other related literature to boost my understanding the scientific properties of materials used in electronics and interconnection packages. One area( one of many areas) of p
Electronics Forum | Sat Jun 23 11:35:58 EDT 2007 | grantp
Hi, Yes, we just built a new plant, and used copper again. The stuff we cut out of the old building was copper, and it was fine without any issues. We lay it on an angle so condensation flows to an end, and can be periodically vented, and we take a
Electronics Forum | Tue Feb 26 11:31:38 EST 2013 | stephendo
Do you have any components that don't come off the machine? It sounds like you work for an OEM, not a CM. I used to work for an OEM with similiar changeover numbers as you. I had them make a list of very common parts that never came off the machine.
Electronics Forum | Mon Oct 15 23:40:43 EDT 2001 | kenbliss
One thing everyone missed is what is the goal of the company. To make money!!! So how many boards per week are you shipping now and how many would you be shipping if you had seperate stencils or a DISPENSER. With quality being number one always the
Electronics Forum | Thu May 18 08:31:28 EDT 2006 | marc
Hi James Short answer... yes... long answer...impingement velocity is excellent for heat transfer but it also is a higher risk of moving components. Variable speed blowers allow you to reduce the speed / impingment and more than likly your compone
Electronics Forum | Fri Jun 25 13:00:48 EDT 2004 | haviland
Hi--We deal in used and recond. equipment in the Midwest, and have available a 1999 Amistar #7100FV w/ a nice complement of feeders, (6) pick up heads, rated component placement at 18,000 pph. Does .0402's, .3 BGA w/ 20 mil pitch, Full vision system,
Electronics Forum | Wed Feb 27 08:31:02 EST 2013 | anton99
We are a OEM and growing pretty fast. The like the idea of setting up common components on the machine. It makes sense from a set up perspective. All of our set up is off line but the set up usually lasts longer than the SMT run so we have some spora
Electronics Forum | Tue Jan 08 22:48:58 EST 2008 | davef
Maybe these folk can help you with your MTM issues. http://www.mtm.org We appreciate the desire to balance the line with respect to standard insertion time, number of insertions, and number of assemblers. In reality there are too many variables fo