Electronics Forum | Wed Mar 01 11:39:15 EST 2017 | ivammendes
Thank you guys for the answers. I have solved a part of the problem. I replaced the caps that Rob mentioned and some blowers start working. I still have problems with 2 heats. One of them the blower is not working even changing the cap. The other one
Electronics Forum | Thu Dec 21 09:32:35 EST 2006 | Brandon
Does anyone know of a source other than speedline? I know these can be had for $100. Speedline wants $1600. It is a cooling zone blower motor for a cross blow system. Not the same blower you see on the top of the heating zones. This one mounts from t
Electronics Forum | Thu Jan 31 13:55:10 EST 2008 | slthomas
My first thought is that your roof exhaust blower is dead and that these boards are the only no-clean boards you build but that's probably not the case. To start from the beginning, though, are all of your blowers operating normally (in the oven an
Electronics Forum | Tue Jun 21 20:45:53 EDT 2022 | stephendo
Are you talking about in the machine as in the blowers? Or the exhaust? When CFM is an issue with an oven I think exhaust. With the blowers I check the oven with a profiler. I would think that the geometry of the heaters and oven would affect how m
Electronics Forum | Mon Mar 20 10:25:30 EDT 2017 | cyber_wolf
@ Westshoredesign: Go take the top covers off your XPM's. Tell me if you see flux residue on the blower motors and the surrounding area. If you see this, grab ahold of the blower motor and rock it back and fourth. It is moves, the seals are melted o
Electronics Forum | Tue Apr 16 09:38:43 EDT 2002 | Karen
I was wondering if anyone knows the HP on the integral 1,500 cfm blower on the SMT-800 PCB Cleaner. thanks.
Electronics Forum | Fri Sep 16 16:22:51 EDT 2005 | JW
Sounds similar to a recent problem with our VIP70. We thought it may be the SSR, then the FCU ... Swapping blower unit with a second oven finally helped us traced the problem to the thermoswitch inside the blower assembly.
Electronics Forum | Fri Dec 22 05:48:29 EST 2006 | maxinorper
Hi, We have refurbished blowers. Cleaned them, changed bearings, capacitor. These parts are standard parts, you will find them in "any" hardware store and Radio Shack type dealers.
Electronics Forum | Wed May 13 15:50:23 EDT 2009 | wrongway
We bought our heller oven in 2005 it has lifetime blower warranty the last time I needed A blower early last year it was stil under warranty and they said nothing about it changing at that time.
Electronics Forum | Tue Dec 14 15:07:51 EST 2010 | remullis
The bearings wear out on those blowers like a cheap pair of underwear. When you replace the bearings be prepared to see significant wear on the motor shaft also. We used to keep a backup ready to go. This will cause you to amp up higher than normal
