Electronics Forum | Wed Oct 08 11:01:07 EDT 2008 | ck_the_flip
NEITHER AXI nor AOI are "stable" or "repeatable." If your false call rate is zero, then you've basically rendered the machine an expensive conveyor (ie it's passing everything 'cause you've opened the limits too much). You can *try* to do a Cpk or
Electronics Forum | Tue Jul 17 19:52:02 EDT 2001 | dougs
Does anyone remember the name of the company that had a small inspection system located on the tact line behind the CP732E from Fuji and the reflow oven? It was a real simple system located on top of a standard conveyor. Pick your brains and let me k
Electronics Forum | Mon Aug 27 15:50:05 EDT 2001 | seand
Hello Everyone, The MPM UP 3000 may be a good bet for your Screenprinting application and I am aware that there are a few in inventory at Speedline Technologies (MPM) that you should be able to get with a warranty for a good price. I know wide vers
Electronics Forum | Thu Feb 06 13:57:01 EST 2003 | D. Brian Davis
I need some feedback on aqueous cleaners. We currently use a Unit Design batch cleaner. We will be looking to upgrade our board washing process and batch sizes in the near future. I am looking for user info. on the advantages/disadvantages to using b
Electronics Forum | Tue Aug 22 20:32:40 EDT 2006 | davef
Fixed position (mounted) [In-line] laser bar code scanners: * microscan 800.762.1149 info@microscan.com [Ken SMTnet] * symbol technologies symbol.com [Russ SMTnet] * Keyence and RVSI inline scanners [B Norman SMTnet] * Datalogic TC1100 bartec-systems
Electronics Forum | Fri Jun 25 09:51:35 EDT 1999 | C.K.
| Dear John/Earl | | Thanks for your clarifications. To me also the problem does not seem to be linked with the PCB. The Pre heater temp. is set at | 450 degree C. We are using Alpha Aq. cleanable flux. Can you elaborate on the Desired profilin
Electronics Forum | Mon Feb 12 21:38:38 EST 2007 | DEK Answer Guy (PR Dept)
Technical Papers) -ProFlow� upgrades (MPU's). -Paste Low Optimisation -Adjustment of the Print Carriage to ensure Squareness to the Stencil -Replacement of Hinge Pin Assembly -Conversion of ProFlow� to Horizontal Mount -ProFlow� Guides for Operators
Electronics Forum | Thu Oct 28 11:41:21 EDT 2004 | Steve Stach
Hello Loz, Blue residues on circuit boards can be caused by copper corrosion, component body deterioration, marking permanently, and adhesive break down. In this case, a more subtle mechanism appears to be possible. This is a no clean application
Electronics Forum | Tue Oct 20 05:47:42 EDT 2020 | Mike Konrad
Most often, dull solder joints (post cleaning) is a result of the cleaning chemical. Most (not all) modern cleaning chemicals are equipped with corrosion inhibition agents which prevent dulling. Check with your chemical supplier to see if your specif
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)