Electronics Forum | Sat Aug 18 10:06:05 EDT 2012 | cyber_wolf
There is no defined method that I am aware of. If your bulbs are old replace them. Other than that adjust the gain and offset until there is clear definition on the edges of the components. Keep an eye on the dump box.If the dump box stays relatively
Electronics Forum | Tue Apr 26 11:03:40 EDT 2016 | williamaxler
The first thing you should check is if your solder pot is compatible with lead free solder. Most selective solder manufactures have different pots for different types of alloys. If it is compatible you would need to dump the pot, fill it with a SN10
Electronics Forum | Tue Oct 12 04:18:12 EDT 1999 | Scott Davies
| | We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am I
Electronics Forum | Fri Feb 13 09:34:43 EST 1998 | Johanna Medero-McGoff
Good morning, We presently have a TP18 and have also experienced the core-dumped fatal error. Everytime that it has happened is when the machine is automatically searching for the reference points, before it starts assembling. Mydata suggested to
Electronics Forum | Thu Feb 19 14:19:15 EST 1998 | Rin Or
| Good morning, | We presently have a TP18 and have also experienced | the core-dumped fatal error. | Everytime that it has happened is when the machine | is automatically searching for the reference | points, before it starts assembling. | Mydat
Electronics Forum | Fri Nov 21 07:57:40 EST 2014 | deanm
Everyone deals with a number of loose SMT parts during production. These usually come from machine attrition (dumped parts), a few parts that are lost during feeder tape changeover, dropped inside the machine, etc. I will categorize them as: A. Ide
Electronics Forum | Mon Oct 11 12:29:01 EDT 1999 | John Thorup
| We have three buckets filled with leftover solder paste from our screen printing process. Kester has informed me that they no longer take paste, but only dross and pot dumpings. Does anyone know if there's someplace I can recycle this, or am I go
Electronics Forum | Tue Mar 27 19:58:13 EDT 2007 | colormaker
I have only used the Quad 4C, We bought it used and ran good right out of the box without the need for repairs. It uses quadaline and does not work very well on IC's. We place 30K 1206 parts a week with a 4 % dump to bin. I have to tolerance set to 3
Electronics Forum | Wed Mar 28 20:35:52 EDT 2007 | darby
Quadalign is very similar to the Samsung. I would think that 4% dump on 1206 or even IC is way over the top. If you are certain that your component data is correct; I suspect that your z-axis centring height may be out of whack and that you are eith
Electronics Forum | Thu Aug 10 21:59:14 EDT 2000 | Dave F
Pascal: Two elementary cautines are: 1 Don't dump the board before the reflowed solder is cooled. 2 Try to manage the side to side temperature variations in your oven. I wouldn't be surprised to see 5�C variation. Good luck
